Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould high productivity custom plastic box customized for electronic components
Euromicron Mould high productivity custom plastic box customized for electronic components

Euromicron Mould high productivity custom plastic box customized for electronic components
  • Euromicron Mould high productivity custom plastic box customized for electronic components
  • Euromicron Mould high productivity custom plastic box customized for electronic components
  • Euromicron Mould high productivity custom plastic box customized for electronic components

Euromicron Mould high productivity custom plastic box customized for electronic components

Part Name:
Get the latest price
Quantity Needed:
Pieces
E-mail:


Part Name:Electronic connector
Part size:18*15*3mm
Raw Material:NYLON+30%GF
Color:RAL9005,Black
Mould Cavity No.:16+16
Injection gate:Cold runner 
Surface finished: Polishing #600
Core &Cavity steel:1.2344, hardness 48~52HRC
Mold component standard:DME or equivalent
Injection machine size:120T
Cycle time:18S
Mold life:300000 shots
Customer:AEC
Export:USA


◇◆ Summary for project running
This product used for electrical connector. And was supposed to be molded in glass-fiber-reinforced, flame-retardant nylon.
Euromicron Mould high productivity custom plastic box customized for electronic components-1

There are many small pin holes on part. Hole’s diameter is 0.6mm with 2.2mm distance of each. Dimension tolerance should be within +/-0.01mm.   Mold design-We will make this mold with 2+2cavity, cold runner in to banana gate. To make parts leave on core side, parting line should be on top. And all pin holes location need to be inserted. Because the hole diameter and distance need to keep in strict tolerance. Separated insert make it easy to replace. Need to pay high attention to electrode making and EDM process. We made whole electrode include all pin holes position, then checked by CMM machine, until shown it was made in proper dimension, took to Mirror EDM manufacture.

Euromicron Mould high productivity custom plastic box customized for electronic components-2

Injection-Any mismatch or flash in switch(female half) hole would cause male half pin bend, so this request holding pressure not too high. but also guarantee not cause sink mark on outside surface. Although the part and mold is small, enough cooling line still necessary. Because the part quantity in demand is one million each month, we need to cut down cycle time as much as possible. So that we can save production cost.




Euromicron Mould electronic communication equipment is developed to achieve high efficiency. New photodecomposition technology is used to make this product more effective in transforming sunlight into power energy. With an IP65-rating shell, the product is dustproof and suitable for outdoor operation
Euromicron Mould custom plastic box is developed with the help of advanced solar technology. It adopts the comprehensive technical system which specially caters to the working principle of solar power generation. With a high-definition LCD display, it can show the measurement results clearly
Euromicron Mould electronic communication equipment is manufactured by utilizing advanced machines. It is processed by a CNC cutting machine, electrical oven, polishing machine, etc. A high-temperature and high-pressure system inside the product speeds up the reaction process, therefore improving the work efficiency
The quality of Euromicron Mould electronic communication equipment can be guaranteed by its hygienic license issued by the Health Supervision Department. Both its physical and chemical filtration systems are in line with the standards required in the pure drinking water. The product has a function of automatic calibration
Euromicron Mould electronic communication equipment will be tested once it's finished. It has been sprayed with different kinds of liquid for quality test and it proved that it is not affected by those liquids. It can easily connect to the computer for monitoring
This product has a timer that can automatically turn off once the drying is finished, which prevents the food from over drying or scorch. According to the usage environment, it can be designed with a self-cleaning function
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...