Electronic products by injection molding for Siemens

Product Comparison

Euromicron's die casting mold is commonly praised in the market due to good materials, fine workmanship, reliable quality, and favorable price.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods. die casting mold in Euromicron has the following advantages, compared with same kind of products in the market.

Company Advantages
1. High quality material is very important for electronic parts in Euromicron Mould Engineering Limited.
2. The product features the desired electrical safety. During its operation, it is less likely to appear problems like discharge, surge current, and current leakage.
3. This product has proper air permeability. Yarn type, fabric structure and fiber parameters all affect this property.
4. The product is ideal for pharmaceutical production, micro-electronics or any application where mineral-free water is needed.

Euromicron Mould high efficiency precision molded plastics siemens for andon electronics-1

Euromicron Mould high efficiency precision molded plastics siemens for andon electronics-2

◇◆ Product parameters

Part Name:	socket
Part size:	525259mm
Raw Material:	ABS
Color:	Grey
Mould Cavity No.:	1*2
Injection gate:	Cold runner with sub gate
Surface finished:	VDI3400-33
Core &Cavity steel:	1.2344,hardness 48~52HRC
Mold component standard:	DME or equivalent
Injection machine size:	180T
Cycle time:	35S
Mold life:	100000 shots
Customer:	Siemens
Export:	Uruguay

◇◆ PRODUCT FEATURES

Euromicron Mould high efficiency precision molded plastics siemens for andon electronics-3

Molded part

This socket has two slots on the two opposite sides close to the back wall.No witness marks from side sores or slides are permitted on the outer surface of the box between the upper edge and these openings.On the other had,sink marks are not allowed near the openings on both the side walls and inside of the box,since these areas are visible once the box is installed.

Mold design

The core of the mold,four small side holes are of conventional design.All remaining components are standard or off-the-shelf items.For instance,a standard mold base with dimensions of 200mmX300mm is employed.The mold shut height is 311mm,Plate thickness are also based on standard dimensions.
Steel grade 1.2344,through-hardened 48-52HRC,was employed for the mold cavity and core.An inner core with helical grooves provides cooling for the stationary-side mold plate. Given the art geometry and the requirement that there be no witness lines on the outside surface,the side cores for the round openings must be placed on the stationary side mold plate.
The ejector plate assembly is actuated by the ejector rod,which is connected to the injection machine ejector,All guiding and wear components have been treated with DME standard.

Company Features
1. Euromicron Mould Engineering Limited is an integrated supplier that provides consumers with comprehensive precision molded plastics products and electronic parts services.
2. We have facilities that work smoothly. Running under the supervision of highly professional staff and stringent computer monitoring, they provide the highest level of product consistency.
3. Euromicron Mould has great ambitions to win the main market of plastic enclosure box. Ask online! All of our Euromicron Mould people will follow the key value of faithful, grateful, fighting and win-win principle. Ask online! Euromicron Mould Engineering Limited has been constantly striving to perfect ourselves. Ask online! Our relentless pursuit for electronic housing is superior quality and service. Ask online!

Packing & Delivery

Packing

CNC package for bare PCB and ESD package for PCBA aasemble with box Package.

With years of export experience along with excellent quality, advanced services and competitive prices, Kingnod has won numerous customers' trust and support.With years of export experience along with excellent quality, advanced services and competitive prices, Kingnod has won numerous customers' trust and support.

Delivery

Shipping 3-5 days after payment.

FAQ

1.Which type of PCBs do you expert in?

We are specialized in producing Singe-side PCB,Double-side PCB, Multilayer PCB,Aluminium PCB,Spray Tin PCB,Immersed Gold PCB, etc.

2.What is your Lead time?

Lead time is usually punctual here, usually 5-10 days for PCB sample, 10-15 days for mass production. For some special situation, we can also advise customer in advance to avoid any inexpectation or loss at customer side.

3.What is your testing policy and how you controle the quality?

For sample, usually tested by flying probe; for PCB Volume over 3 square meters, usually tested by fixture, this will be more faster. Due to there's many steps to PCB production, we usually do inspection after every step.

4.What is your package?

With Inner vacuum package and out carton.

5.PCB shipment?

This is depend on customer, sometimes we ship through our forwarder, who is also the agency of DHL, TNT, UPS, Fedex, and so on. Our forwarder can provide too much better freight cost than we get directly from those express enterprise.

6.What is your produce ability?

Our ability is average 30,000 square meters per month.

7.I only have the pcb sample, not pcb file, can you produce it for me?

Yes, we can copy file based on your sample, this file names gerber, and production then is accorded to gerber file.

8.Can you design gerber file?

We can design gerber file if customer can provide us schematic, schematic sample can also be provided if customer want.

9.What kind of PCB file format can you accept for production? What CAM software do you use?

We accept Gerber file for production. CAM350, GENESIS, UCAM, GC-CAM, V-2000.

10.Will you allow me to put several part number together into one panel?

Yes, this is usually happen in we factory, this way can help customers reduce some cost and to a certain degree, it can help reduce some assembly cost.

11.What is your minimum order quantity?

We have no limitation on MOQ, prototype, medium volume and large volume are all acceptable.

12.Will RoHS Lead-Free Custom Spec. Boards be marked with lead-free symbol?

Yes, can, but need customer to specify this requirement in file.

13.Are my design files safe when I submit them to you for manufacturing?

Any customer's file will be protected very well here in our factory and we will not let any third party know. We can sign NDA with you.

Shenzhen Shuyi Electronic Co.,Ltd

g******i

The design of Euromicron Mould precision molded plastics follows a set of criteria. All criteria are developed from a lifecycle perspective of the screen, covering manufacturing, use, and end of life or recovery phases. The product has gone through a sound quality control system

t******z

The tests for Euromicron Mould precision molded plastics involve many aspects. They are color shading, colorfastness, symmetry, size fitting, breathability, abrasion resistance, and durability. It guarantees that no flaw issues will be found

t******o

The design of Euromicron Mould plastic enclosure box is sophisticated. It is an outcome of a better understanding of science, ergonomics, comfort, production, and the business of marketing. It can be used widely on many occasions such as parties and weddings

d******j

Euromicron Mould electronic parts is well-tailored. It mainly utilizes advanced production machines for sampling, cutting, dyeing, sewing, and performance testing to achieve the best results. The product can be tested with a free-of-charge sample

u******z

Many variables are considered when designing Euromicron Mould plastic enclosure box. They are durability and function, anticipated shoe stresses and strains, the health and safety of the shoe wearer, and the shoe's aesthetics. It is not only suitable for men but also for women

x******g

The product features flammability resistance. It has passed the fire resistance testing, which can ensure that it does not ignite and pose risk to lives and property. It is routinely packaged in a PP bag and standard carton to avoid damage during the delivery process

Product Message

*Name

Phone

*E-mail

*Content

Euromicron Mould high efficiency precision molded plastics siemens for andon electronics