Euromicron Mould plastic case for electronics is manufactured under a complete production system. From automatic assembly and mechanical assembly to manual assembly operated by skilled workers, professional technicians are always there to supervise and inspect. 2.
Through the strict testings conducted by our professional QC team, the product has a highly dependable quality. 3.
This product gives the wearer a different feel, with good flexibility and resistance to deformation and thickness. 4.
The product has been widely put into use by various industries under the backdrop of requirements for competitive production ability.
|Mould Cavity No.:||1*1|
|Injection gate:||Hot runner with pin point gate|
|Surface finished: ||Mirror Polishing|
|Core &Cavity steel:||1.2344,hardness 48~52HRC|
|Mold component standard:||HASCO or equivalent|
|Injection machine size:||180T|
|Mold life:||300000 shots|
◇◆ Summary for project running
We carried out first trial shot on 40th day,little longer than planed.Since YUDO hot runner system came out of expected date,one week late.Three trial shots for samples production,and finished whole project in 50days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request.
Both parts critical surface need in high polishing,mirror grade,no any marked or scratch allowed.When production,have to take out by robot hand,and cover PE film for protection.
Silkscreen also made by EMM factory.
At first trial shot,case part came out with obvious sink mark and scratch on side surface.
The ribs inside are too thick cause sink mark,and no draft angle on side surface cause scratch when mold open.Finally We cut rib material solved sink mark problem.But no draft angle allowed on side surface,we had to add two sliders on both side,to ensure all outside surface look glossy.
The grid part has many small window and only 0.6mm thick.We found flowing mark at each window corner and short shot problem at first trial shot.Then we suggested change high polishing surface to fine texture,VDI3400-33,also change injection gate location,from both side for filling.Customer confirmed and part came out look good.
Euromicron Mould Engineering Limited has earned a good reputation for the manufacture of plastic case for electronics in China. We have been regarded as a reliable manufacturer. 2.
Our factory firmly adheres to the up-to-date quality control system and strict production management to fulfill the quality commitment to customers. 3.
We bear social responsibilities. As a result, we use high quality recycled or natural materials in the vast majority of our products. Our company will adhere to high standards of professional ethics and deal with our customers with integrity and fairness to achieve long-term success. Check it! We spare no efforts to minimize the negative environmental impact in every aspect of our business. We will pilot new a production approach that focuses on eliminating waste, reducing and controlling pollution. We guarantee that our company will continue to grow with our customers. Our pleasure is to make customers feel the benefits and provide services beyond their expectations. Check it!