Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould high efficiency plastic housing for electronics supplier for andon electronics
Euromicron Mould high efficiency plastic housing for electronics supplier for andon electronics

Euromicron Mould high efficiency plastic housing for electronics supplier for andon electronics
  • Euromicron Mould high efficiency plastic housing for electronics supplier for andon electronics
  • Euromicron Mould high efficiency plastic housing for electronics supplier for andon electronics
  • Euromicron Mould high efficiency plastic housing for electronics supplier for andon electronics

Euromicron Mould high efficiency plastic housing for electronics supplier for andon electronics

During the production of Euromicron Mould plastic housing for electronics, it is carefully checked and tested when it is wire bonded, ensuring that it has stable optical characteristics. XUCAI neon &fluorescent glitter is suitable for body art
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


Part Name:Electronic connector
Part size:18*15*3mm
Raw Material:NYLON+30%GF
Color:RAL9005,Black
Mould Cavity No.:16+16
Injection gate:Cold runner 
Surface finished: Polishing #600
Core &Cavity steel:1.2344, hardness 48~52HRC
Mold component standard:DME or equivalent
Injection machine size:120T
Cycle time:18S
Mold life:300000 shots
Customer:AEC
Export:USA


◇◆ Summary for project running
This product used for electrical connector. And was supposed to be molded in glass-fiber-reinforced, flame-retardant nylon.
Euromicron Mould high efficiency plastic housing for electronics supplier for andon electronics-1

There are many small pin holes on part. Hole’s diameter is 0.6mm with 2.2mm distance of each. Dimension tolerance should be within +/-0.01mm.   Mold design-We will make this mold with 2+2cavity, cold runner in to banana gate. To make parts leave on core side, parting line should be on top. And all pin holes location need to be inserted. Because the hole diameter and distance need to keep in strict tolerance. Separated insert make it easy to replace. Need to pay high attention to electrode making and EDM process. We made whole electrode include all pin holes position, then checked by CMM machine, until shown it was made in proper dimension, took to Mirror EDM manufacture.

Euromicron Mould high efficiency plastic housing for electronics supplier for andon electronics-2

Injection-Any mismatch or flash in switch(female half) hole would cause male half pin bend, so this request holding pressure not too high. but also guarantee not cause sink mark on outside surface. Although the part and mold is small, enough cooling line still necessary. Because the part quantity in demand is one million each month, we need to cut down cycle time as much as possible. So that we can save production cost.




The production of Euromicron Mould plastic housing for electronics includes overall three parts: the production of filament, the bulb, and the base, which is highly automated. XUCAI glitter powder is easy to use
The production of Euromicron Mould plastic housing for electronics is strictly carried out. It is treated under high temperature and high pressure to ensure the best luminous efficiency. XUCAI glitter powder undergoes strict quality checks
The bulb of Euromicron Mould plastic housing for electronics is of well-crafted. Through comparison of a large amount of experimental data, the bulb is manufactured to have excellent luminescence performance. XUCAI metallic glitter is mild without stimulations
Euromicron Mould plastic housing for electronics has passed various kinds of tests according to international lighting standards. In some cases, some even tougher standards such as vibration test are adopted to make sure that it is going to last. The raw material of XUCAI neon &fluorescent glitter is strictly controlled
During the production of Euromicron Mould plastic housing for electronics, it is tested for both life and strength, which is performed at some independent testing facilities. XUCAI glitter powder is availiable in 200+colors and 30 sizes
Thanks to its special plastic housing for electronics and its high-tech plastic housing for electronics, plastic housing for electronics adds high-end experience to any user. XUCAI holographic glitter has special shapes for options
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...