CONTACT PERSON
Marketing :
General Manager :
Manufacturing Director :
Technical Director:
Part Name: | Gateway |
Part size: | 175*136*32mm |
Raw Material: | ABS+PC |
Color: | RAL9010,White |
Mould Cavity No.: | 1*1 |
Injection gate: | Hot runner with pin point gate |
Surface finished: | Mirror Polishing |
Core &Cavity steel: | 1.2344,hardness 48~52HRC |
Mold component standard: | HASCO or equivalent |
Injection machine size: | 180T |
Cycle time: | 35S |
Mold life: | 300000 shots |
Customer: | HEKATR@N |
Export: | Germany |
We carried out first trial shot on 40th day,little longer than planed.Since YUDO hot runner system came out of expected date,one week late.Three trial shots for samples production,and finished whole project in 50days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request.
Both parts critical surface need in high polishing,mirror grade,no any marked or scratch allowed.When production,have to take out by robot hand,and cover PE film for protection.
Silkscreen also made by EMM factory.
At first trial shot,case part came out with obvious sink mark and scratch on side surface.
The ribs inside are too thick cause sink mark,and no draft angle on side surface cause scratch when mold open.Finally We cut rib material solved sink mark problem.But no draft angle allowed on side surface,we had to add two sliders on both side,to ensure all outside surface look glossy.
The grid part has many small window and only 0.6mm thick.We found flowing mark at each window corner and short shot problem at first trial shot.Then we suggested change high polishing surface to fine texture,VDI3400-33,also change injection gate location,from both side for filling.Customer confirmed and part came out look good.
1. What about delivery time?
Re: Samples within 2 working days and bulk quantity within 10 working days.
2. What about MOQ?
Re: We can accept sample order firstly.
3. What warranty and after-sale service do you offer?
Re: Each printer will have one year (12 months) warranty. Free components will be offered for repair in warranty period, if the issue caused by non-artificial damages.
We will offer technical supports or helps in your daily use for lifetime and offer latest software for your updating.
4. Can you offer driver/SDK for the printers?
Re: Yes, We are supplying all windows driver, windows 98,2000,VISTA,7,8. Both 32 bit and 64 bit system.
5. Besides the English language, do your printers support other languages? what operation system they backup?
Re: Yes, our printer not only supports English language, but also Russian, Spanish, Portuguese etc 48 different languages available, and it backups iOS, Android, Windows, Linux, Opos operation systems.
Copyright © 2018 Euromicron Mould Engineering Limited | All Rights Reserved