Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould high efficiency plastic enclosure box supplier for andon electronics
Euromicron Mould high efficiency plastic enclosure box supplier for andon electronics

Euromicron Mould high efficiency plastic enclosure box supplier for andon electronics
  • Euromicron Mould high efficiency plastic enclosure box supplier for andon electronics
  • Euromicron Mould high efficiency plastic enclosure box supplier for andon electronics

Euromicron Mould high efficiency plastic enclosure box supplier for andon electronics

◇◆...
Get the latest price
Quantity Needed:
Pieces
E-mail:
Enterprise Strength
  • Our excellence comes from the efforts of staff from such departments as R&D department, sales department, design department and production department. There are designers, R&D experts, and after-sales personnel in our company.
  • Euromicron insists on the concept of 'survive by quality, develop by reputation' and the principle of 'customer first'. We are dedicated to providing quality and comprehensive services for customers.
  • Euromicron always sticks to our tenet of "quality comes first" by focusing on the quality control, service improvement, and fast response.
  • We have been dedicated to the manufacturing of cnc service for about years, and have become the leading enterprise in the industry. This enables us to introduce and operate a complete set of production equipment, and achieve intelligentization and standardization.
  • Since the establishment, our sales network has been continuously expanding to where our sales service is highly appraised by customers at home and abroad. In future, we would like to establish our marketing network overseas and expand the business further.
Company Advantages
1. The development of Euromicron Mould overmolding electronics concerns much electric knowledge. It is finally developed after the R&D team studied and tested electric coils, electric circuits, and inductance value.
2. This product is wrinkle-free, machine washable and hypoallergenic. It guarantees extra strength and durability while featuring a softer and finer touch.
3. This product will certainly raise wearers' confidence if not anything else. It helps wearers easily be accepted and mostly look good.
4. With such a long lifespan, it will be part of people's lives for many years. It has been regarded as one of the most important parts of decorating people's rooms.


Euromicron Mould high efficiency plastic enclosure box supplier for andon electronics-1


◇◆ Product parameters


Part Name:switch
Part size:92.8*61.2*8.6mm
Raw Material:ABS
Color:RAL9010,White
Mould Cavity No.:1*4
Injection gate:Cold runner with sub gate
Surface finished: Polishing #600
Core &Cavity steel:M310,hardness 52~55HRC
Mold component standard:DME or equivalent
Injection machine size:250T
Cycle time:35S
Mold life:300000 shots
Customer:Siemens
Export:Uruguay


◇◆ Summary for project running
This product used for electrical appliance,the light switch.Plastic raw material need in inflaming retarding and heat resistant.
Euromicron Mould high efficiency plastic enclosure box supplier for andon electronics-2

We carried out first trial shot on 35th day,twice trial shots for samples production,and finished whole project in 45days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request. Due to many thin and high side ribs,part stick on core side tightly.Mold need smooth polishing and need enough ejection pins and as big as possible.Sink mark problem on surface easily to cause,due the part thickness is too thick and not equal,we solved it by adjusting injection parameter.Four hooks distance need to be molding in high precision location,Because they will assemble to bottom shelf.To make it work well,we cut material at first trial shot.After checking first samples,made correction to mold.So that the secondary samples met assembly requirement.

Euromicron Mould high efficiency plastic enclosure box supplier for andon electronics-3

Another problem we met on first trial shot was the ribs short shot.Because they were very thin and high,plastic filling easily to get cold when injection.Later we had a discussion,decided to change the side gate to two sub gates,change core cooling water to hot oil,100℃,and add injection pressure,so that filling time shorten a lot,finally we got excellent part. This experience also can apply to similar product with thin and high ribs.



Company Features
1. Euromicron Mould Engineering Limited produces plastic enclosure box while searching for the specific needs in the industry.
2. We have skillful and professional production and quality assurance teams. They ensure the products are manufactured under the certified quality management systems, so as to sustain product quality.
3. We strive to create products with better environmental performance and technologies that contribute to sustainable mobility, while our industrial activities can improve economic and social conditions. Ask online! We strive to provide quality service to customers. Our sales department will give a quick response, and the logistics department will organize and track all the goods and respond to inquiries in a timely manner. Ask online!
Innovative design concept: From appearance to construction, Euromicron Mould overmolding electronics is designed by our professional designers. They discuss to each other to ensure that each design has the innovative characteristics of industrial standard. Wearing parts and spare parts are of standardized design
Euromicron Mould overmolding electronics is manufactured employing the optimum quality raw material as per set industry guidelines. The products must be 100% tested to ensure their functionality, reliability, security and durability before shipment
Innovative design concept: the design concept of Euromicron Mould plastic enclosure box is carried out by a team of professionals who keep innovative ideas in mind and thus the innovation-oriented product is made. Meixin innovative ability enables to constantly develop new products
The whole production of Euromicron Mould overmolding electronics is completed by a team of experienced professionals who know clearly how to make lean production. Meixin can make the machine according to customers' requirements
plastic enclosure box is built using standard materials procured from trusted vendors of the market. High efficiency acceleration engine are adopted to ensure the smooth running
Its performance outperforms well similar products. What's more, Meixin products are widely used in all kinds of brushes making
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...