Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould high efficiency plastic enclosure box manufacturer for andon electronics
Euromicron Mould high efficiency plastic enclosure box manufacturer for andon electronics

Euromicron Mould high efficiency plastic enclosure box manufacturer for andon electronics
  • Euromicron Mould high efficiency plastic enclosure box manufacturer for andon electronics
  • Euromicron Mould high efficiency plastic enclosure box manufacturer for andon electronics
  • Euromicron Mould high efficiency plastic enclosure box manufacturer for andon electronics
  • Euromicron Mould high efficiency plastic enclosure box manufacturer for andon electronics
  • Euromicron Mould high efficiency plastic enclosure box manufacturer for andon electronics

Euromicron Mould high efficiency plastic enclosure box manufacturer for andon electronics

Our professional equipment allows us to fabricate such plastic electrical enclosures .
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. In the production of Euromicron Mould plastic electrical enclosures , the heat sealing machine is applied to guarantee the splicing bounding areas are finely sealed. This procedure is scrutinized by skilled workers. It is characterized by a very good surface finish
2. Euromicron Mould Engineering Limited's inner departments collaborate efficiently, which ensures all production projects can be finished timely and smoothly. Vacuum packing method is adopted for the product to avoid mold rusting during transportation
3. With the assistance of plastic electrical enclosures , plastic enclosure box has gained its popularity in the market. Company logo can be printed on the surface of the product


Euromicron Mould high efficiency plastic enclosure box manufacturer for andon electronics-1
Euromicron Mould high efficiency plastic enclosure box manufacturer for andon electronics-2


◇◆ Product parameters


Part Name:Electronic connector
Part size:45*39.5*21mm
Raw Material:PA9T30GF
Color:RAL9005,Black
Mould Cavity No.:1*4
Injection gate:Hot runner 
Surface finished: VDI3400-33
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:250T
Cycle time:40S
Mold life:100000 shots
Customer:Bitron
Export:Italy


◇◆ PRODUCT FEATURES
A connector shell was supposed to be molded in glass-fiber-reinforced,flame-retardant nylon.
Euromicron Mould high efficiency plastic enclosure box manufacturer for andon electronics-3

This connector include two different parts(upper and lower halves),were to be produced in a single mold.Prior to the start of production,the question arose as to whether a second gate might not be required to fill the part.To avoid weld lines and entrapped air.however,it might also be necessary to use only a single gate.This flexibility as to gating was supposed to be possible simple by switching a hot runner nozzle on or off.A further difficulty resulted from the small amount of space in which  the gates were to be located on the face of the molded part.All of these requirements were satisfied through the particular arrangement of the conductive,internally heated hot-runner system.

Euromicron Mould high efficiency plastic enclosure box manufacturer for andon electronics-4

Mold design-We made this mold with four cavity.Runner system consists of a heated sprue bushing,a hot-runner manifold and four hot-runner nozzles.The hot-runner nozzles have not been installed parallel to the longitudinal axis of the mold,but rather at an angle.In spite of the unfavorable geometric relationships,it is possible to gate each part on its face in this manner.This arrangement is possible,because the solidified melt in the outer regions of the hot-runner manifold and nozzle channels precludes any possibility of leakage.Each of the hot-runner nozzle is individually controlled and can thus be switched on or off as required.It is thus possible to fill the part through either on or two gates.These measures alone,however,would not have been adequate to vary the gating possibilities.Attention also have to be given to the hot-runner manifold to ensure that no melt stagnated at continuously high temperatures in the runner channels when the various gating possibility were being employed.




Company Features
1. Our professional equipment allows us to fabricate such plastic electrical enclosures .
2. To lead the plastic enclosure box market is our vision. Inquire!
Using the state-of-the-art production equipment, Euromicron Mould plastic electrical enclosures is produced with flawless surface finishes.
The production process of Euromicron Mould plastic enclosure box complies with the international standards. It is inspected carefully by professional QC before delivery
Our design team has strong innovation capacity, making sure our Euromicron Mould plastic electrical enclosures has a variety of innovative, aesthetically-pleasing, and functional designs. The product has been ISO 9001:2000 and 14000 certified
Euromicron Mould plastic electrical enclosures is carefully finished with premium materials. It is exported based on our 10+ year experience on foreign trade
Euromicron Mould plastic electrical enclosures is manufactured in tune with set production guidelines by employing premium-quality raw material and pioneering technology. No MOQ is set for its standard version
The product operates in a stable manner. It is able to withstand the instantaneous change of current without occurring sudden shutdown. Its distributors are located at home and abroad say the USA, Russia, and the Philippines
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...