Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  > 

AI - Page Sitemap

 > 

Euromicron Mould high efficiency plastic enclosure box customized for electronic components

Euromicron Mould high efficiency plastic enclosure box customized for electronic components

Euromicron Mould high efficiency plastic enclosure box customized for electronic components
  • Euromicron Mould high efficiency plastic enclosure box customized for electronic components
  • Euromicron Mould high efficiency plastic enclosure box customized for electronic components
  • Euromicron Mould high efficiency plastic enclosure box customized for electronic components

Euromicron Mould high efficiency plastic enclosure box customized for electronic components

With professional production of plastic enclosure box, Euromicron Mould Engineering Limited has won a broader international market.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Enterprise Strength
  • Our excellence comes from the efforts of staff from such departments as R&D department, sales department, design department and production department. There are designers, R&D experts, and after-sales personnel in our company.
  • Euromicron firmly believes that high-quality products and services serve as the foundation of customer's trust. A comprehensive service system and a professional customer service team are established based on that. We are dedicated to solving problems for customers and meeting their demands as much as possible.
  • Euromicron always sticks to our tenet of "quality comes first" by focusing on the quality control, service improvement, and fast response.
  • We have been dedicated to the manufacturing of cnc service for about years, and have become the leading enterprise in the industry. This enables us to introduce and operate a complete set of production equipment, and achieve intelligentization and standardization.
  • Since the establishment, our sales network has been continuously expanding to where our sales service is highly appraised by customers at home and abroad. In future, we would like to establish our marketing network overseas and expand the business further.
Product Comparison
cnc service is a truly cost-effective product. It is processed in strict accordance with relevant industry standards and is up to the national quality control standards. The quality is guaranteed and the price is really favorable.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Compared with products in the same category, cnc service has the following advantages.
Company Advantages
1. Euromicron Mould plastic case for electronics has the compliant design throughout its lifecycle.
2. Certified to international standards, this product delivers dependable performance.
3. The product is absolutely quality-assured as it has been thoroughly tested on every stage of the production process by our quality controllers as per the set industry norms.
4. Euromicron Mould Engineering Limited can take control of the whole process of plastic enclosure box manufacturing in its factory so quality is guaranteed.


Part Name:Electronic connector
Part size:18*15*3mm
Raw Material:NYLON+30%GF
Color:RAL9005,Black
Mould Cavity No.:16+16
Injection gate:Cold runner 
Surface finished: Polishing #600
Core &Cavity steel:1.2344, hardness 48~52HRC
Mold component standard:DME or equivalent
Injection machine size:120T
Cycle time:18S
Mold life:300000 shots
Customer:AEC
Export:USA


◇◆ Summary for project running
This product used for electrical connector. And was supposed to be molded in glass-fiber-reinforced, flame-retardant nylon.
Euromicron Mould high efficiency plastic enclosure box customized for electronic components-1

There are many small pin holes on part. Hole’s diameter is 0.6mm with 2.2mm distance of each. Dimension tolerance should be within +/-0.01mm.   Mold design-We will make this mold with 2+2cavity, cold runner in to banana gate. To make parts leave on core side, parting line should be on top. And all pin holes location need to be inserted. Because the hole diameter and distance need to keep in strict tolerance. Separated insert make it easy to replace. Need to pay high attention to electrode making and EDM process. We made whole electrode include all pin holes position, then checked by CMM machine, until shown it was made in proper dimension, took to Mirror EDM manufacture.

Euromicron Mould high efficiency plastic enclosure box customized for electronic components-2

Injection-Any mismatch or flash in switch(female half) hole would cause male half pin bend, so this request holding pressure not too high. but also guarantee not cause sink mark on outside surface. Although the part and mold is small, enough cooling line still necessary. Because the part quantity in demand is one million each month, we need to cut down cycle time as much as possible. So that we can save production cost.




Company Features
1. With professional production of plastic enclosure box, Euromicron Mould Engineering Limited has won a broader international market.
2. We adopt world-advanced technology when manufacturing electronic parts .
3. Euromicron Mould Engineering Limited always set high demand on its staff to provide best service for our customers. Contact us! plastic case for electronics is our tenet to do the business for our costumers. Contact us! All of our communication processor will undergo strict test before selling. Contact us!
Euromicron Mould plastic enclosure box has passed a series of security tests. It has been tested the electric strength test, also known as high-voltage insulation test, water-resistant test, and tests for potential overload and statics. The product is an indispensable support tool for data centers
The manufacturing process of Euromicron Mould plastic enclosure box proceeds as follows: the procurement of raw materials, parts and components processing, plating and anodizing, complete mechanical assembly, and testing. Its ventilation holes allow max airflow, ensuring the heating dissipation effect
Euromicron Mould communication processor has been tested to meet the requirements of basic standards. These standards cover parts tolerances&deformation, size stability, specification consistency, and function realization. The product undergoes a high precision machining
Euromicron Mould plastic case for electronics is a design integrating intelligence. Automatic control and automation detection technologies that are highly efficient are adopted into its design. The product is an indispensable support tool for data centers
Euromicron Mould plastic enclosure box is carefully produced. It is treated with flame retardant, environmentally friendly fabrics, chemical and safe dyes. Its raw materials are skin-friendly. The product can keep many important devices being attached in a firm, fixed position to ensure stable operation
We have strict quality control procedures to ensure the product goes to customers functioning safely and competitively. The product complies with IEC, ETSI, and DIN41494 standards
The quality of the product is recognized by the international specification. It has 2 to 4 fans to dissipate the heat discharged from devices
This product is of high quality, which is the result of conducting strict quality inspections. The product has been tested and certified by CE, UL, and RoHS
The product has passed all relative quality certificates. The robust structure makes sure it will not tip over easily
The quality of this product meets with both national standards and international norms. The product undergoes a high precision machining
The product is in accordance with international quality standards. The product can be designed with cable entrance on the bottom and both sides, so as to allow for power supply
The product outperforms other products well in the industry due to rising market achievements. The product is optimized for managing cables
With the increasing popularity worldwide, the product is bound to have a wider commercial application in the future. It is made of rugged materials that stand up to decades of use
Accurate market positioning of Euromicron Mould Engineering Limited allows you the biggest order discount and highest return on investment. The premium steel frame can resist abrasion
Till now this product has demonstrated a huge market prospect. The slots inside are individually numbered to keep cable routing and devices organized
This product has a broad business scope in the the international market. The robust structure makes sure it will not tip over easily
Euromicron Mould Engineering Limited cooperates with many outstanding communication processor suppliers. It has 2 to 4 fans to dissipate the heat discharged from devices
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...