Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould high efficiency electronic housing customized for electronic components
Euromicron Mould high efficiency electronic housing customized for electronic components

Euromicron Mould high efficiency electronic housing customized for electronic components
  • Euromicron Mould high efficiency electronic housing customized for electronic components
  • Euromicron Mould high efficiency electronic housing customized for electronic components
  • Euromicron Mould high efficiency electronic housing customized for electronic components
  • Euromicron Mould high efficiency electronic housing customized for electronic components

Euromicron Mould high efficiency electronic housing customized for electronic components

Euromicron Mould overmolding electronics is designed by a team of professionals who try to maximize ease and safety of access, throughput and attraction value. It does not contain any toxic material and meets the requirements of environmental protection
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. Euromicron Mould overmolding electronics is designed by a team of professionals who try to maximize ease and safety of access, throughput and attraction value. It does not contain any toxic material and meets the requirements of environmental protection
2. This ultra-high-end product will add a classic style and elegance to the room, ensuring a comfortable all-season. One-stop solutions are offered for the product, including design, manufacturing, and assembly
3. It has the advantage of a low self-discharge rate. Its materials, including an anode, cathode, and electrolyte are all made based on a precise formula which aims to achieve maximum electricity performance. The surface of the product adopts scratch-resistant coating
4. It is tear resistant. A stronger thread is used to improve the strength of the fabric and makes any tears or holes less likely to spread and become bigger. With the development of science and technology, the product is upgraded quickly
5. It is less prone to pilling in the long run. Fiber, which doesn't pill easily, is used and the lubricant agent is used in the jet dyeing and dyeing process to reduce wear and friction. Its structure proves to be firm and stable


Euromicron Mould high efficiency electronic housing customized for electronic components-1
Euromicron Mould high efficiency electronic housing customized for electronic components-2


◇◆ Product parameters


Part Name:socket
Part size:52*52*59mm
Raw Material:ABS
Color:Grey
Mould Cavity No.:1*2
Injection gate:Cold runner with sub gate
Surface finished: VDI3400-33
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:DME or equivalent
Injection machine size:180T
Cycle time:35S
Mold life:100000 shots
Customer:Siemens
Export:Uruguay


◇◆ PRODUCT FEATURES


Euromicron Mould high efficiency electronic housing customized for electronic components-3
Molded part

This socket has two slots on the two opposite sides close to the back wall.No witness marks from side sores or slides are permitted on the outer surface of the box between the upper edge and these openings.On the other had,sink marks are not allowed near the openings on both the side walls and inside of the box,since these areas are visible once the box is installed.

Mold design
The core of the mold,four small side holes are of conventional design.All remaining components are standard or off-the-shelf items.For instance,a standard mold base with dimensions of 200mmX300mm is employed.The mold shut height is 311mm,Plate thickness are also based on standard dimensions.
Steel grade 1.2344,through-hardened 48-52HRC,was employed for the mold cavity and core.An inner core with helical grooves provides cooling for the stationary-side mold plate. Given the art geometry and the requirement that there be no witness lines on the outside surface,the side cores for the round openings must be placed on the stationary side mold plate.
The ejector plate assembly is actuated by the ejector rod,which is connected to the injection machine ejector,All guiding and wear components have been treated with DME standard.



Company Features
1. Euromicron Mould Engineering Limited focuses on the R&D and manufacture of electronic housing in strict accordance with both domestic and international standards. With our strong technical support, Euromicron Mould Engineering Limited is ready to build a solid foundation in the future.
2. There is a sound and standardized quality management system in the Euromicron Mould factory.
3. Euromicron Mould Engineering Limited strictly adopts high technology to ensure the quality of plastic enclosure . Since the company has expanded to a larger scale, it dedicates to the community and society development by improving the living standard in where customers and employees live and work. Ask!
Euromicron Mould plastic enclosure has a secured source of raw materials. Opticlimate two-stage evaporation system is developed to deliver 100% fresh air cooling
plastic enclosure design determines the final form of electronic housing from Euromicron Mould Engineering Limited. Opticlimate two-stage evaporation system has a low noise design
Euromicron Mould overmolding electronics is designed in accorance with the basic production standard. Opticlimate two-stage evaporation system has a low noise design
Euromicron Mould electronic housing is designed by the concerted effort of strong R&D team and design team. Hicool's opticlimate split unit is produced in a 25,000 square meters factory
In order to be the leading overmolding electronics manufacturers, our experts also focuses on its design. Opticlimate two-stage evaporation system has a low noise design
With the assistance of overmolding electronics, overmolding electronics has gained its popularity in the market. Opticlimate split unit has higher heat transfer efficiency than conventional heat exchangers
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...