Euromicron Mould custom plastic cases for electronics comes in a wide variety of design styles. 2.
The product can last for a long time. It can withstand erosion, corrosion, fatigue, creep, and thermal shock throughout its life. 3.
Euromicron Mould Engineering Limited comply with stringent requirements which make its electrical molding much more custom plastic cases for electronics .
◇◆ Product parameters
|Mould Cavity No.:||1*2|
|Injection gate:||Cold runner with sub gate|
|Surface finished: ||VDI3400-33|
|Core &Cavity steel:||1.2344,hardness 48~52HRC|
|Mold component standard:||DME or equivalent|
|Injection machine size:||180T|
|Mold life:||100000 shots|
◇◆ PRODUCT FEATURES
This socket has two slots on the two opposite sides close to the back wall.No witness marks from side sores or slides are permitted on the outer surface of the box between the upper edge and these openings.On the other had,sink marks are not allowed near the openings on both the side walls and inside of the box,since these areas are visible once the box is installed.
With many years of experience in creating electrical molding , Euromicron Mould deeply implement the pursuit of quality of life to meet different needs. 2.
Quality is above everything in Euromicron Mould Engineering Limited. 3.
We are environmentally responsible. We comply in both behavior and spirit with all environmental-related laws and regulations that are relevant and applicable to our operations. We have set up our sustainability practices. We aim to mitigate the impact of our activities on the environment by decreasing CO2 emissions and improving our recycling rate. We have made efforts in promoting green production. In our business activities, including production, we seek new ways to efficiently utilize natural resources and energy resources, aiming to reduce resource waste. The successful implementation of an environmental management system has enabled us to significantly reduce the environmental impact of the business. We will continue to make our business activities be more environmental-friendly.