Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould high efficiency custom plastic box supplier for andon electronics
Euromicron Mould high efficiency custom plastic box supplier for andon electronics

Euromicron Mould high efficiency custom plastic box supplier for andon electronics
  • Euromicron Mould high efficiency custom plastic box supplier for andon electronics
  • Euromicron Mould high efficiency custom plastic box supplier for andon electronics
  • Euromicron Mould high efficiency custom plastic box supplier for andon electronics
  • Euromicron Mould high efficiency custom plastic box supplier for andon electronics
  • Euromicron Mould high efficiency custom plastic box supplier for andon electronics

Euromicron Mould high efficiency custom plastic box supplier for andon electronics

The manufacturing process of Euromicron Mould overmolding electronics is complicated. For example, its semiconductors must undergo a rigorous cleaning process to remove dirt and dust. Its control knob comes with easy adjustment
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


Euromicron Mould high efficiency custom plastic box supplier for andon electronics-1
Euromicron Mould high efficiency custom plastic box supplier for andon electronics-2


◇◆ Product parameters


Part Name:Electronic connector
Part size:45*39.5*21mm
Raw Material:PA9T30GF
Color:RAL9005,Black
Mould Cavity No.:1*4
Injection gate:Hot runner 
Surface finished: VDI3400-33
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:250T
Cycle time:40S
Mold life:100000 shots
Customer:Bitron
Export:Italy


◇◆ PRODUCT FEATURES
A connector shell was supposed to be molded in glass-fiber-reinforced,flame-retardant nylon.
Euromicron Mould high efficiency custom plastic box supplier for andon electronics-3

This connector include two different parts(upper and lower halves),were to be produced in a single mold.Prior to the start of production,the question arose as to whether a second gate might not be required to fill the part.To avoid weld lines and entrapped air.however,it might also be necessary to use only a single gate.This flexibility as to gating was supposed to be possible simple by switching a hot runner nozzle on or off.A further difficulty resulted from the small amount of space in which  the gates were to be located on the face of the molded part.All of these requirements were satisfied through the particular arrangement of the conductive,internally heated hot-runner system.

Euromicron Mould high efficiency custom plastic box supplier for andon electronics-4

Mold design-We made this mold with four cavity.Runner system consists of a heated sprue bushing,a hot-runner manifold and four hot-runner nozzles.The hot-runner nozzles have not been installed parallel to the longitudinal axis of the mold,but rather at an angle.In spite of the unfavorable geometric relationships,it is possible to gate each part on its face in this manner.This arrangement is possible,because the solidified melt in the outer regions of the hot-runner manifold and nozzle channels precludes any possibility of leakage.Each of the hot-runner nozzle is individually controlled and can thus be switched on or off as required.It is thus possible to fill the part through either on or two gates.These measures alone,however,would not have been adequate to vary the gating possibilities.Attention also have to be given to the hot-runner manifold to ensure that no melt stagnated at continuously high temperatures in the runner channels when the various gating possibility were being employed.




Euromicron Mould overmolding electronics is designed according to the wishes of the customers. Its color, font, and form meet the needs of the packaged product. The product can deliver lively dynamics and deep bass from warm and expressive tuning
The quality of Euromicron Mould custom plastic box is guaranteed. It has undergone comprehensive testing, including verifying appliance characteristics, measuring energy efficiency and energy consumption, energy class labeling and assuring electrical safety. Each channel has independent limiter and compressor, ensuring no interference caused by other channels
Euromicron Mould overmolding electronics is produced with advanced equipment. It is processed by water-resistant testing machine, steamer, washing machine and special vacuum cleaning equipment for textile. The clipping limiter is designed to strengthen the protection of the loudspeaker
Euromicron Mould overmolding electronics is of high quality and standard. Its construction and maintenance meet the safety requirements within the Electricity (Safety) Regulations. Each channel has independent limiter and compressor, ensuring no interference caused by other channels
The manufacturing process of Euromicron Mould custom plastic box consists of several stages: market trend research, prototyping, fabric and accessory selection, cutting, sewing and craftmen evaluation. It is easy to carry and store due to its compact design
This product is moisture proof. Its materials have gone through damp-proof treatment, making it not affected by the wet condition. OEM/ODM service is available for the product to meet demands for color and size
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...