Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould high efficiency communication processor supplier for electronic components
Euromicron Mould high efficiency communication processor supplier for electronic components

Euromicron Mould high efficiency communication processor supplier for electronic components
  • Euromicron Mould high efficiency communication processor supplier for electronic components
  • Euromicron Mould high efficiency communication processor supplier for electronic components
  • Euromicron Mould high efficiency communication processor supplier for electronic components

Euromicron Mould high efficiency communication processor supplier for electronic components

The product has a good sealing effect. The sealing materials used in it feature high airtightness and compactness which does not allow any medium to pass through.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
cnc service, manufactured based on high-quality materials and advanced technology, has excellent quality and favorable price. It is a trustworthy product which receives recognition and support in the market.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Euromicron's cnc service has more advantages over similar products in terms of technology and quality.
Application Scope
Euromicron's injection mold is widely used in various scenes.Since the establishment, Euromicron has always been focusing on the R&D and production of cnc service. With great production capability, we can provide customers with personalized solutions according to their needs.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.
Company Advantages
1. The food trays of Euromicron Mould plastic enclosures for electronics are designed with large holding and bearing capacity. Besides, the food trays are designed with grid-structure which helps dehydrate the food evenly.
2. The product is not prone to forming bacteria on its surface. The materials used have long term antibacterial properties that reduce the potential for bacterial growth.
3. The product has a good sealing effect. The sealing materials used in it feature high airtightness and compactness which does not allow any medium to pass through.
4. This product gets cold fast and stays consistent. The digital adjustable thermostat is a huge plus. - One of our customers said.
5. The product can easily and conveniently be recharged with a simple battery charger, which is very convenient for people.


Part Name:Electronic connector
Part size:18*15*3mm
Raw Material:NYLON+30%GF
Color:RAL9005,Black
Mould Cavity No.:16+16
Injection gate:Cold runner 
Surface finished: Polishing #600
Core &Cavity steel:1.2344, hardness 48~52HRC
Mold component standard:DME or equivalent
Injection machine size:120T
Cycle time:18S
Mold life:300000 shots
Customer:AEC
Export:USA


◇◆ Summary for project running
This product used for electrical connector. And was supposed to be molded in glass-fiber-reinforced, flame-retardant nylon.
Euromicron Mould high efficiency communication processor supplier for electronic components-1

There are many small pin holes on part. Hole’s diameter is 0.6mm with 2.2mm distance of each. Dimension tolerance should be within +/-0.01mm.   Mold design-We will make this mold with 2+2cavity, cold runner in to banana gate. To make parts leave on core side, parting line should be on top. And all pin holes location need to be inserted. Because the hole diameter and distance need to keep in strict tolerance. Separated insert make it easy to replace. Need to pay high attention to electrode making and EDM process. We made whole electrode include all pin holes position, then checked by CMM machine, until shown it was made in proper dimension, took to Mirror EDM manufacture.

Euromicron Mould high efficiency communication processor supplier for electronic components-2

Injection-Any mismatch or flash in switch(female half) hole would cause male half pin bend, so this request holding pressure not too high. but also guarantee not cause sink mark on outside surface. Although the part and mold is small, enough cooling line still necessary. Because the part quantity in demand is one million each month, we need to cut down cycle time as much as possible. So that we can save production cost.




Company Features
1. Having accumulating years of experience in manufacturing of plastic enclosures for electronics , Euromicron Mould Engineering Limited has taken its place among reliable manufacturers.
2. Euromicron Mould Engineering Limited has a set of product layout elites with abundant market experience.
3. We embrace sustainability all the time. We invest in automation technologies and continuously work to reduce our carbon footprint across the value chain. In the future, we will continue to serve customers with high professionalism and control every stage of the manufacturing process based on the advantages of cost and capability in China while maintaining high-quality standards. We are committed to building a positive corporate culture. We encourage employees to think outside the box to communicate and share their creativity or ideas on improving the products or customer service. Hence we can utilize their creativity drives business success. We will continue to serve our customers with a high degree of professionalism, maintaining and controlling all stages of the manufacturing process in accordance with China's cost and capability advantages while maintaining high-quality standards. Inquire!
Euromicron Mould communication processor is made by using good quality material and latest machine technology under the supervision of the team of the experts and professionals. This product can be carried to outdoor family picnics, house parties, cultural events, etc
Euromicron Mould communication processor is produced using excellent quality material under the strict supervision of professionals. Its improved speaker gives out the richer and louder sound
The progress production of Euromicron Mould plastic enclosures for electronics leads the industry. Its compact design makes it fit perfectly into small spaces
The offered Euromicron Mould communication processor is produced by our extraordinary experts using the best technology and unique ideas. This product can be paired with all types of devices that use Bluetooth technology
Euromicron Mould communication processor is fabricated employing quality-approved raw materials. This product can be carried to outdoor family picnics, house parties, cultural events, etc
To guarantee quality of this product, our quality check team strictly implements measures of testing. Adopting a new Bluetooth chip, this product exhibits high transmission speeds
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...