The quality of Euromicron Mould overmolding electronics is ensured through a wide range of testing. These tests are for performance and durability, as well as, safety certifications, chemical, flammability testing, and sustainability. 2.
The product will not accumulate too much heat. Its substrate used has improved heat dissipation, which greatly lowers the operating temperature. 3.
The product is ecologically friendly. The traditional refrigerant chemicals that will result in the erosion of the ozone layer has been totally eliminated. 4.
It is widely accepted that Euromicron Mould now has gained much popularity since founded for its high quality and reasonable price.
|Part Name:||Electronic connector|
|Mould Cavity No.:||16+16|
|Injection gate:||Cold runner |
|Surface finished: ||Polishing #600|
|Core &Cavity steel:||1.2344, hardness 48~52HRC|
|Mold component standard:||DME or equivalent|
|Injection machine size:||120T|
|Mold life:||300000 shots|
◇◆ Summary for project running
There are many small pin holes on part. Hole’s diameter is 0.6mm with 2.2mm distance of each. Dimension tolerance should be within +/-0.01mm.
Mold design-We will make this mold with 2+2cavity, cold runner in to banana gate. To make parts leave on core side, parting line should be on top. And all pin holes location need to be inserted. Because the hole diameter and distance need to keep in strict tolerance. Separated insert make it easy to replace. Need to pay high attention to electrode making and EDM process. We made whole electrode include all pin holes position, then checked by CMM machine, until shown it was made in proper dimension, took to Mirror EDM manufacture.
Injection-Any mismatch or flash in switch(female half) hole would cause male half pin bend, so this request holding pressure not too high. but also guarantee not cause sink mark on outside surface. Although the part and mold is small, enough cooling line still necessary. Because the part quantity in demand is one million each month, we need to cut down cycle time as much as possible. So that we can save production cost.
With strong economic strength, Euromicron Mould always offer the most excellent communication processor . 2.
With our broad sales network, we have exported our products to many countries while establishing a reliable strategic partnership with many large and famous companies. 3.
In order for our company to be socially responsible, we implement environmental sustainability plans. For example, we do recycling work, waste management, greener supply chains, reducing water source waste, etc. Inquire now! Our company thinks highly of social responsibility. We always comply with the human rights standards which have a direct relation to employees' welfare and of course, we will actively partake in consumer protection activities. Inquire now! Always prepare for satisfying the continuously changing market demands is our main objective. Currently, our company makes numerous efforts and invests in product innovation for the markets. Inquire now!