Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould harness overmolding parts source now for merchant
Euromicron Mould harness overmolding parts source now for merchant

Euromicron Mould harness overmolding parts source now for merchant
  • Euromicron Mould harness overmolding parts source now for merchant
  • Euromicron Mould harness overmolding parts source now for merchant
  • Euromicron Mould harness overmolding parts source now for merchant
  • Euromicron Mould harness overmolding parts source now for merchant
  • Euromicron Mould harness overmolding parts source now for merchant

Euromicron Mould harness overmolding parts source now for merchant

This a intake manifold of automobile....
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. Our Euromicron Mould overmolding parts is made to meet the highest quality standards. The product is highly evaluated by many famous enterprises, such as Ford, Volkswagen, Toyota, and Honda
2. There are no sharp edges on this product. People are able to set assured that this product will not cause any scratch. The product goes through several inspections before delivery with defects removed
3. Compared with other products, this product has obvious advantages, longer service life and more stable performance. It has been tested by authoritative third parties. It is produced in the large-scale workshops, making mass production possible
4. As any defects are completely eliminated in the inspection process, the product is always in the best quality state. Company logo can be printed on the surface of the product


This a intake manifold of automobile. It is made of the material PA66+25%. It is a engineering material. It works in high temperature environment. The product size is 17x86x53mm. In general, the wall thickness of the product is 2.5mm. The product is arc shape. One side is big, another is small. The big side has a thread for connecting. The small side has a hook for connecting. There is small connecting pipe in the middle of the product. This is a three-way pipe.

Euromicron Mould harness overmolding parts source now for merchant-1
Euromicron Mould harness overmolding parts source now for merchant-2


◇◆ Product Features


Euromicron Mould harness overmolding parts source now for merchant-3

A single cavity mold is designed for this product. Hot runner system is used in the mold. The gate type is valve gate. There is no cold runner in this mold. The mold structure is very complex. There are three sliders in the mold. The slider of the big side has a long stroke (is 165mm). And it moves along a arc rail. It mainly forms the inside of the product. So it needs a good cooling loop to cool it. There a slider for the small side. Also it needs a cooling loop to cool it. There is a fixing mechanism between two sliders. The function of the fixing mechanism is to avoiding the sliders moving of when injecting.

Euromicron Mould harness overmolding parts source now for merchant-4

There is a slider to form the inside of the connecting pipe. The lines of the slider must be good because the connectors of the product have a sealing requirement. The step of the parting line is max 0.03mm. No flash is allowed at the parting surface. There are some marks with index number, part number and date stamps in the cavities side. The date stamp includes month and year. The cooling system is supplied with hot water because the mold temperature requires 65-93°C. The product is ejected out by round ejector pins after injecting.

We have rich experience on this type mold. And we did enough preparation and technical analysis before mold design. The mold was delivered to customer in advance. The customer was very satisfied with our work and mold quality.



Company Features
1. Euromicron Mould Engineering Limited is a professional provider of cost effective overmolding parts products.
2. Euromicron Mould is experienced in applying remarkable technology to producing car body molding .
3. Taking the lead position in molded components industry has always been our pursuing goal. Contact us!
The production process of Euromicron Mould car body molding is continuously inspected by our QC team to make sure that product quality is in line with garment standards and regulations. It will not break or tear easily
The production of Euromicron Mould molded components is rigorously undertaken by the factory itself, inspected by the third-party authorities. Especially the inner parts, such as food trays, are required to pass the tests including chemical release testing and high-temperature withstanding capacity.
Euromicron Mould molded components is completed by our professional architects and engineers who consider every project carefully such as the location, topography, climate, and culture. It does not affect the soil structure after it biodegrades
Euromicron Mould car body molding is carried out by our designers who aim to maintain and improve the lifestyle of customers by delivering the most effective and innovative wellness sauna product. The product does not contain any harmful plastic or wax lining
The hardware components of Euromicron Mould car body molding have been tested by a third-party testing organization, passing the FCC, CE and ROHS safety certification.
It is thoroughly inspected to ensure zero defects. It will decompose naturally within 60 to 90 days
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...