Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould grid car door molding one-stop service supplier for businessman
Euromicron Mould grid car door molding one-stop service supplier for businessman

Euromicron Mould grid car door molding one-stop service supplier for businessman
  • Euromicron Mould grid car door molding one-stop service supplier for businessman
  • Euromicron Mould grid car door molding one-stop service supplier for businessman
  • Euromicron Mould grid car door molding one-stop service supplier for businessman

Euromicron Mould grid car door molding one-stop service supplier for businessman

The R&D of Euromicron Mould injection molded plastic parts is put emphasis on technical innovation.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Application Scope
Euromicron's die casting mold is widely used in various scenes.In addition to providing high-quality products, Euromicron also provides effective solutions based on the actual conditions and the needs of different customers.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.
Company Advantages
1. The R&D of Euromicron Mould injection molded plastic parts is put emphasis on technical innovation.
2. This product has low VOCs. It has been tested to meet field-validated and performance-based standards of Greenguard certification.
3. Euromicron Mould Engineering Limited always puts quality first and customer foremost in the first place.


Euromicron Mould grid car door molding one-stop service supplier for businessman-1
Euromicron Mould grid car door molding one-stop service supplier for businessman-2



◇◆ Product Features


Euromicron Mould grid car door molding one-stop service supplier for businessman-3

According to customer's requirement, the mold was designed into 4 cavities mold. It was cooled by cold water. The part was foldable box. The concave shape of the cover was designed in the cavity side of the mold. In that case, the cover was easy to stick in the cavity side when opening the mold. The part should be damaged and deformed.


Euromicron Mould grid car door molding one-stop service supplier for businessman-4

To solve the problem, we designed a ejecting system in the cavity side of the mold. The ejecting system was actuated by two hydraulic cylinder. In this way, the cavity side was too thick. And the sprue was very long. It was bad for injecting. The cycle time of production increased. And more plastic material was wasted. The cost was increased a lot. So we suggest customer to add a hot runner system in the mold.

Euromicron Mould grid car door molding one-stop service supplier for businessman-5

The tip gate of the hot nozzle was directly on the part. So no plastic material was wasted on the cold runner and the cycle time was short. It was about 38 seconds. The link connected cover and frame, which's thickness was very critic. If it too thick, it was hard and very difficult to fold it. If it was too thin, it was difficult to fill full when injecting. And it was easy to break during in use. Also its lifetime was short. It can't meet the requirement of the part.

Euromicron Mould grid car door molding one-stop service supplier for businessman-6

To reach it, we adjusted the dimension of the link and did trail three times. Through continuous optimization, it worked very well finally. The mold was delivered to customer on time. The customer was very satisfied with the quality of the mold.



Company Features
1. Euromicron Mould Engineering Limited has been concentrating on the business of car door molding . We have earned the necessary qualifications for our business.
2. Continue R&D efforts are made on our auto molding .
3. We keep mission in mind to create better auto parts company with our professional spirit. Ask online! Euromicron Mould is committed to providing more advanced technologies, better injection molded plastic parts and more thoughtful services, and helping fuel the development of society. Ask online!
The design of Euromicron Mould car door molding fuses traditional and contemporary elements. It is carried out by designers who have developed an inherent sensitivity towards the materials and classical architectural elements that are condensed in modern decorative arts. This product is safe to wear and is easy for anyone to use
The necessary tests for Euromicron Mould car door molding have been conducted. These tests include flexibility testing, dimension stability testing, slip resistance testing, and fatigue resistance testing. Built-in a temperature controller, this product can achieve optimal heated comfort
The design of Euromicron Mould auto molding is an unrivaled blend of creativity, innovation and market potential. It, carried out by professional designers who deliver a collection of contemporary design furnishing, embraces unconventional color mix ideas and shape design know-how. With enough elasticity, this product allows for a wide range of movement
The design of Euromicron Mould auto molding is an integration of some necessary elements. They are color matching, texture, lines, pattern silhouette, shape, etc. This product comes in a variety of heating options
A wide variety of manufacturing processes of Euromicron Mould auto molding are as followed: pattern design, fabric sourcing, fabric pre-treatment, grading, layout, cutting, sewing, and ironing. This product allows users to maintain their body heat even when the temperature drops
We adhere to strict quality industry standards and fully guarantee that our products meet international standards. Its digital controls are completely waterproofed to be washer machine and dryer safe
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...