Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould electronics plastic enclosure customized for andon electronics
Euromicron Mould electronics plastic enclosure customized for andon electronics

Euromicron Mould electronics plastic enclosure customized for andon electronics
  • Euromicron Mould electronics plastic enclosure customized for andon electronics
  • Euromicron Mould electronics plastic enclosure customized for andon electronics
  • Euromicron Mould electronics plastic enclosure customized for andon electronics
  • Euromicron Mould electronics plastic enclosure customized for andon electronics
  • Euromicron Mould electronics plastic enclosure customized for andon electronics

Euromicron Mould electronics plastic enclosure customized for andon electronics

Euromicron Mould Engineering Limited continuously works to rejuvenate and expand its capabilities by developing new precision molded plastics products. It totally conforms to the UL Flame Rating of 94V-0
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


This cover is part of an telecom set-top box.
The appearance surface has dimension of 396X56X45mm.There are one round opening ¢35 and one rectangular opening 20X150mm.Also there are many boss and rid in high side.There is undercut on right wall of long side.
Euromicron Mould electronics plastic enclosure customized for andon electronics-1
Euromicron Mould electronics plastic enclosure customized for andon electronics-2



◇◆ Product Features


Euromicron Mould electronics plastic enclosure customized for andon electronics-3
Mold design

We set sprue bushing on round opening,when fill with sub gate from both sides.Ejector sleeve need locate on boss to help release part.Pin or insert for high side rib to help air venting,also for easily manufacture or EMD process.A slider would be need for side undercut.Since all outside surface are visible,no slider split line is allowed.This mean a tunnel slider would be needed on core side.Mold base size would be 600X400mm with height 350mm.The design of the mold provide for simultaneous opening of the two parting lines with the aid of two racks and a pinion for each side.As it is essential that no gate marks show on the front of the molded parts,injection had to take place on the inside.

Euromicron Mould electronics plastic enclosure customized for andon electronics-4
Cooling

This cover transfer heat quickly to mold surfaces.so that increased outlay on the cooling system is worthwhile in molds for such parts.Cooling of the core should be given special attention.Also some of the inserts are thin and very high.A beryllium/copper cap with six radial cooing channels is placed on the core insert.These cooling channel require drilling of the center of rube leading to the cap.This drilling weakens the center tube and there is the risk of rupture if the mounting nuts are tightened excessively.Compression spring are provided to permit an exactly defined tightening torque.Coolant is supplied to the cooling channels in the slides via tubes threaded into the slides.Slots in the guide strips allow these tubes to follow the motion of the slides.



Euromicron Mould precision molded plastics is carefully crafted by the skillful workers.
Euromicron Mould plastic enclosure is manufactured under the visionary guidance of trained professionals. It can be manufactured with a customized thickness
The production processes for Euromicron Mould plastic enclosure are primarily based on renewable resources. It has low water absorptivity in the damp environment
Euromicron Mould precision molded plastics has a timeless look that follows the current trend. It can reduce the electrical signal loss and provides the highest efficiency
Euromicron Mould precision molded plastics is manufactured by technical specialists and dedicated staff. The product can be resistant to corrosion
It has reliable colorfastness. It is mandatory to identify and eliminate any possible colorfastness risks prior to production. The product has dynamic and mechanical stability
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...