Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould electronics plastic enclosure box wholesale for andon electronics
Euromicron Mould electronics plastic enclosure box wholesale for andon electronics

Euromicron Mould electronics plastic enclosure box wholesale for andon electronics
  • Euromicron Mould electronics plastic enclosure box wholesale for andon electronics
  • Euromicron Mould electronics plastic enclosure box wholesale for andon electronics
  • Euromicron Mould electronics plastic enclosure box wholesale for andon electronics

Euromicron Mould electronics plastic enclosure box wholesale for andon electronics

Our skilled professionals supervise the quality control throughout the production, greatly guaranteeing the quality of the product.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Enterprise Strength
  • Our excellence comes from the efforts of staff from such departments as R&D department, sales department, design department and production department. There are designers, R&D experts, and after-sales personnel in our company.
  • Euromicron can provide professional and practical services based on customer demand.
  • Euromicron always sticks to our tenet of "quality comes first" by focusing on the quality control, service improvement, and fast response.
  • We have been dedicated to the manufacturing of cnc service for about years, and have become the leading enterprise in the industry. This enables us to introduce and operate a complete set of production equipment, and achieve intelligentization and standardization.
  • Since the establishment, our sales network has been continuously expanding to where our sales service is highly appraised by customers at home and abroad. In future, we would like to establish our marketing network overseas and expand the business further.
Company Advantages
1. Euromicron Mould plastic enclosure box stands out under the sophisticated production process.
2. Our skilled professionals supervise the quality control throughout the production, greatly guaranteeing the quality of the product.
3. Each staff of Euromicron Mould has been skilled in plastic enclosure box industry for years.


Part Name:Electronic connector
Part size:18*15*3mm
Raw Material:NYLON+30%GF
Color:RAL9005,Black
Mould Cavity No.:16+16
Injection gate:Cold runner 
Surface finished: Polishing #600
Core &Cavity steel:1.2344, hardness 48~52HRC
Mold component standard:DME or equivalent
Injection machine size:120T
Cycle time:18S
Mold life:300000 shots
Customer:AEC
Export:USA


◇◆ Summary for project running
This product used for electrical connector. And was supposed to be molded in glass-fiber-reinforced, flame-retardant nylon.
Euromicron Mould electronics plastic enclosure box wholesale for andon electronics-1

There are many small pin holes on part. Hole’s diameter is 0.6mm with 2.2mm distance of each. Dimension tolerance should be within +/-0.01mm.   Mold design-We will make this mold with 2+2cavity, cold runner in to banana gate. To make parts leave on core side, parting line should be on top. And all pin holes location need to be inserted. Because the hole diameter and distance need to keep in strict tolerance. Separated insert make it easy to replace. Need to pay high attention to electrode making and EDM process. We made whole electrode include all pin holes position, then checked by CMM machine, until shown it was made in proper dimension, took to Mirror EDM manufacture.

Euromicron Mould electronics plastic enclosure box wholesale for andon electronics-2

Injection-Any mismatch or flash in switch(female half) hole would cause male half pin bend, so this request holding pressure not too high. but also guarantee not cause sink mark on outside surface. Although the part and mold is small, enough cooling line still necessary. Because the part quantity in demand is one million each month, we need to cut down cycle time as much as possible. So that we can save production cost.




Company Features
1. Euromicron Mould Engineering Limited is one of the major firms offering plastic enclosure for electronic products in China. We are known for having unrivaled experience in quality product manufacturing.
2. Quality is above everything in Euromicron Mould Engineering Limited.
3. We seek to be agents of change – for our clients, our partners, our people, and society. We are committed to creating a competitive advantage to our clients through unique custom solutions. We favor the concept of reducing carbon footprint during production. Attaching high importance to the wastes such as water and gases, we will not discharge these wastes illegally or randomly, instead, we may collect some of the wastes and utilize it for different purposes. Inquire now! In order for our company to be socially responsible, we implement environmental sustainability plans. For example, we do recycling work, waste management, greener supply chains, reducing water source waste, etc. Inquire now! The absolute goal of our environmental work is that our industrial processes should have the lowest possible impact on the environment. Our strategy is to stay one step ahead of official requirements by implementing an active environmental management system and to continuously improve our environmental standard. Inquire now!
Euromicron Mould plastic enclosure for electronic products is produced in a process that is sustainable and uniquely revolutionary, and no harmful or toxic substances are involved. This product is easy to clean and can be used many times
Euromicron Mould plastic enclosure for electronic products is carefully designed. It must be refined to remove impurities and further develop its full luster potential. This product is beneficial to keeping healthy gums
Euromicron Mould plastic enclosure box has been seriously tested. Its properties such as strength, ductility, and toughness are all verified by these tests. Its packaging can be customized per customers' specifications
Testing for Euromicron Mould plastic enclosure box is performed thoroughly. These tests are performed on its mechanical parts, materials and the entire structure to ensure its mechanical properties. It helps combat stains from people's everyday food and drinks
Euromicron Mould plastic enclosure for electronic products is fully tested by our quality control professionals, who test the tension and fatigue of each style of bedding.
plastic enclosure box is produced using plastic enclosure for electronic products method, it has such features as plastic enclosure for electronic products. This product has a neutral pH, which means it will be gentle on gums and tooth enamel
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...