Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  > 

AI - Page Sitemap

 > 

Euromicron Mould electronics electronic housing manufacturer for andon electronics

Euromicron Mould electronics electronic housing manufacturer for andon electronics

Euromicron Mould electronics electronic housing manufacturer for andon electronics

Part Name
socket
Part size
52*52*59mm
Raw Material
ABS
Color
Grey
Mould Cavity No
1*2
Injection gate
Cold runner with sub gate
Surface finished
VDI3400-33
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Application Scope
injection mold produced by Euromicron is applied to the following industries.Euromicron is dedicated to solving your problems and providing you with one-stop and comprehensive solutions.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.
Enterprise Strength
  • Our excellence comes from the efforts of staff from such departments as R&D department, sales department, design department and production department. There are designers, R&D experts, and after-sales personnel in our company.
  • Euromicron regards honesty as the foundation and treats customers sincerely when providing services. We solve their problems in time and provide one-stop and thoughtful services.
  • Euromicron always sticks to our tenet of "quality comes first" by focusing on the quality control, service improvement, and fast response.
  • We have been dedicated to the manufacturing of cnc service for about years, and have become the leading enterprise in the industry. This enables us to introduce and operate a complete set of production equipment, and achieve intelligentization and standardization.
  • Since the establishment, our sales network has been continuously expanding to where our sales service is highly appraised by customers at home and abroad. In future, we would like to establish our marketing network overseas and expand the business further.
Company Advantages
1. Euromicron Mould electronic housing is manufactured using the most advanced technology and most sophisticated equipment.
2. Under the high demand on testing procedure, the product is guaranteed to be zero defect.
3. Being high quality and cost competitive, the product will surely become one of the highly marketable products.
4. The product has a wide variety of practical and commercial applications.


Euromicron Mould electronics electronic housing manufacturer for andon electronics-1
Euromicron Mould electronics electronic housing manufacturer for andon electronics-2


◇◆ Product parameters


Part Name:socket
Part size:52*52*59mm
Raw Material:ABS
Color:Grey
Mould Cavity No.:1*2
Injection gate:Cold runner with sub gate
Surface finished: VDI3400-33
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:DME or equivalent
Injection machine size:180T
Cycle time:35S
Mold life:100000 shots
Customer:Siemens
Export:Uruguay


◇◆ PRODUCT FEATURES


Euromicron Mould electronics electronic housing manufacturer for andon electronics-3
Molded part

This socket has two slots on the two opposite sides close to the back wall.No witness marks from side sores or slides are permitted on the outer surface of the box between the upper edge and these openings.On the other had,sink marks are not allowed near the openings on both the side walls and inside of the box,since these areas are visible once the box is installed.

Mold design
The core of the mold,four small side holes are of conventional design.All remaining components are standard or off-the-shelf items.For instance,a standard mold base with dimensions of 200mmX300mm is employed.The mold shut height is 311mm,Plate thickness are also based on standard dimensions.
Steel grade 1.2344,through-hardened 48-52HRC,was employed for the mold cavity and core.An inner core with helical grooves provides cooling for the stationary-side mold plate. Given the art geometry and the requirement that there be no witness lines on the outside surface,the side cores for the round openings must be placed on the stationary side mold plate.
The ejector plate assembly is actuated by the ejector rod,which is connected to the injection machine ejector,All guiding and wear components have been treated with DME standard.



Company Features
1. The Euromicron Mould brand is primarily focused on the production of electronic housing .
2. Our custom plastic box are all manufactured by our professional experts who have been specialized in this field for years.
3. Euromicron Mould Engineering Limited has always been focused on the professional production of plastic prototype . Please contact. The whole company, Euromicron Mould, relies on the great culture of people-oriented. Please contact.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...