Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould electronics communication processor manufacturer for electronic components
Euromicron Mould electronics communication processor manufacturer for electronic components

Euromicron Mould electronics communication processor manufacturer for electronic components
  • Euromicron Mould electronics communication processor manufacturer for electronic components
  • Euromicron Mould electronics communication processor manufacturer for electronic components
  • Euromicron Mould electronics communication processor manufacturer for electronic components
  • Euromicron Mould electronics communication processor manufacturer for electronic components

Euromicron Mould electronics communication processor manufacturer for electronic components

This connector was...
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


This connector was supposed to be molded in glass-fiber-reinforced,flame-retardant nylon.
It came with size 35X29.5X26mm,with 40pcs pins in center.High rib,hooks and boss on round side.One four cavity mold should employ a mold base dimension 250*230mm,with 280mm height.Steel grade 1.2767 is used for the mold inserts,while grade 1.2312 is employed for mold plates as well as the ejector plate.Steel grade 1.1730 is mused for remaining plate and rails.Thermal insulating plates,which are available in sizes to match the standard mold plates,serve to insulate the mold from the machine platens.
Euromicron Mould electronics communication processor manufacturer for electronic components-1
Euromicron Mould electronics communication processor manufacturer for electronic components-2



◇◆ Mold design


Euromicron Mould electronics communication processor manufacturer for electronic components-3

This part is simple,but need to ensure 40pcs pin locate properly when plastic filling,specially under high pressure flow.To save production cost,we need to cut down cycle time.So two or three even more over-mold inserts need.Injection machine operator no need to set pin one by one into mold.Just need to set in additional insert before molding.When mold open,just need put whole insert with pin into core.Of course,operator need to take part with insert together.The hooks on both sides are undercut,need design for slider or angle lifter.But no slider split line allow in middle surface.So split line should be set on radius of corner.

The molded part is ejected via knockout pins.In addition to providing for ejection.these pins serve to vent the cavity during filling.It is in part for this reason that the knockout pins are located beneath ribs and other deep section of the part.where entrapped air is to be expected.The mold filling pattern during injection of the molding compound as well as the mechanical and thermal aspects of the mold design were simulated and established during the design phase with the aid of appropriate computer programs.



The production of Euromicron Mould custom plastic cases for electronics is strictly carried out according to food industry requirements. Every part is rigorously disinfected before it is assembled to the main structure. Rayson ensures on-time delivery with efficient manufacturing processes
Euromicron Mould custom plastic cases for electronics has passed various quality tests which include the test on the effect of compressed air. The whole test process is strictly conducted by our QC team. There are many ways to bond fibers but they all fall within three main methods: mechanically interlock the fibers, glue the fibers together, or melt the fibers together
The performance of Euromicron Mould communication processor has been improved by our professional R&D team who try to deliver long-life performance at extended temperature ranges. We are equipped with 9 production lines whose monthly output is up to 2000 tons
At the designing stage, Euromicron Mould communication processor is created fully considering the pneumatic principle by the designer team using mature CAD technique. Our plant covers an area of more than 50,000 square meters
Before the Euromicron Mould custom plastic cases for electronics is stored or shipped, the finishing operations and inspection remain to be performed following curing. The finishing operation trims flash or excess rubber. Rayson nonwoven fabric is manufactured by a committed, well-trained workforce
This product uses well. Chemical or mechanical finishing agents are applied to fabrics to improve its durability and/or utility. The nonwoven products that Rayson provides have a broad range of applications
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...