Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould electronicmmunication electronic housing customized for andon electronics
Euromicron Mould electronicmmunication electronic housing customized for andon electronics

Euromicron Mould electronicmmunication electronic housing customized for andon electronics
  • Euromicron Mould electronicmmunication electronic housing customized for andon electronics
  • Euromicron Mould electronicmmunication electronic housing customized for andon electronics
  • Euromicron Mould electronicmmunication electronic housing customized for andon electronics
  • Euromicron Mould electronicmmunication electronic housing customized for andon electronics
  • Euromicron Mould electronicmmunication electronic housing customized for andon electronics

Euromicron Mould electronicmmunication electronic housing customized for andon electronics

This product is strongly resistant to moisture. It is not prone to the effect of water will easily cause mold. One-stop solutions are offered for the product, including design, manufacturing, and assembly
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. Euromicron Mould injection moldable plastics will go through double inspection and quality test. It is tested in terms of its sleeves, springs, and position wedges in the last production stages. It is manufactured to have stable chemical properties
2. One of the best things about wearing this product is the comfort that it brings. It is soft to touch and can be very soothing for someone who may have skin rashes. Company logo can be printed on the surface of the product
3. This product is strongly resistant to moisture. It is not prone to the effect of water will easily cause mold. One-stop solutions are offered for the product, including design, manufacturing, and assembly
4. The product can work in extreme temperature. It runs normally even the weather is cold, scorching hot, or humid. It is produced in the large-scale workshops, making mass production possible


This cover is part of an telecom set-top box.
The appearance surface has dimension of 396X56X45mm.There are one round opening ¢35 and one rectangular opening 20X150mm.Also there are many boss and rid in high side.There is undercut on right wall of long side.
Euromicron Mould electronicmmunication electronic housing customized for andon electronics-1
Euromicron Mould electronicmmunication electronic housing customized for andon electronics-2



◇◆ Product Features


Euromicron Mould electronicmmunication electronic housing customized for andon electronics-3
Mold design

We set sprue bushing on round opening,when fill with sub gate from both sides.Ejector sleeve need locate on boss to help release part.Pin or insert for high side rib to help air venting,also for easily manufacture or EMD process.A slider would be need for side undercut.Since all outside surface are visible,no slider split line is allowed.This mean a tunnel slider would be needed on core side.Mold base size would be 600X400mm with height 350mm.The design of the mold provide for simultaneous opening of the two parting lines with the aid of two racks and a pinion for each side.As it is essential that no gate marks show on the front of the molded parts,injection had to take place on the inside.

Euromicron Mould electronicmmunication electronic housing customized for andon electronics-4
Cooling

This cover transfer heat quickly to mold surfaces.so that increased outlay on the cooling system is worthwhile in molds for such parts.Cooling of the core should be given special attention.Also some of the inserts are thin and very high.A beryllium/copper cap with six radial cooing channels is placed on the core insert.These cooling channel require drilling of the center of rube leading to the cap.This drilling weakens the center tube and there is the risk of rupture if the mounting nuts are tightened excessively.Compression spring are provided to permit an exactly defined tightening torque.Coolant is supplied to the cooling channels in the slides via tubes threaded into the slides.Slots in the guide strips allow these tubes to follow the motion of the slides.



Company Features
1. Euromicron Mould Engineering Limited is a large-scale enterprise integrating the production, R&D, sales and service of electronic housing . There is a sound and standardized quality management system in the Euromicron Mould factory.
2. Located in a beautiful natural setting, the factory enjoys an advantageous position where is close to the important transportation hubs. This geographical condition offers the factory many benefits such as cutting the transportation cost.
3. We have imported a series of production facilities in our factory. They are highly automated, which allows to create and manufacture virtually any shape or design of a product. Euromicron Mould focuses on developing the spirit of enterprise which provides high end service. Check it!
The material of electronic housing is exported from abroad and its quality is superior. This product can keep the packaged contents safe and secured
injection moldable plastics is developed for higher performance and electronic housing. It has good temperature resistance performance
Euromicron Mould Engineering Limited insists on using first-class raw material. This product is easy to tear off by hand
This new type injection moldable plastics called injection moldable plastics is gradually widely used with its outstanding design. The product does not peel off even used in a humid environment
Euromicron Mould is an enterprise who engages in innovation and development of electronic housing. It will not lose its adherence force even stored for a long period
It features rapid moisture absorption. It has passed various moisture management tests through a wide array of testing methods including AATCC 195 and CNS 15659-2 L1038-2. It has been certified under REACH and RoHS
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...