Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould electronic plastic prototype supplier for andon electronics
Euromicron Mould electronic plastic prototype supplier for andon electronics

Euromicron Mould electronic plastic prototype supplier for andon electronics
  • Euromicron Mould electronic plastic prototype supplier for andon electronics
  • Euromicron Mould electronic plastic prototype supplier for andon electronics
  • Euromicron Mould electronic plastic prototype supplier for andon electronics

Euromicron Mould electronic plastic prototype supplier for andon electronics

Part Name...
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
Euromicron carefully selects quality raw materials. Production cost and product quality will be strictly controlled. This enables us to produce cnc service which is more competitive than other products in the industry. It has advantages in internal performance, price, and quality.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Compared with products in the same category, Euromicron's cnc service has the following outstanding features.
Enterprise Strength
  • Our excellence comes from the efforts of staff from such departments as R&D department, sales department, design department and production department. There are designers, R&D experts, and after-sales personnel in our company.
  • Euromicron attaches great importance to customers. We devote ourselves to providing high-quality products and professional services.
  • Euromicron always sticks to our tenet of "quality comes first" by focusing on the quality control, service improvement, and fast response.
  • We have been dedicated to the manufacturing of cnc service for about years, and have become the leading enterprise in the industry. This enables us to introduce and operate a complete set of production equipment, and achieve intelligentization and standardization.
  • Since the establishment, our sales network has been continuously expanding to where our sales service is highly appraised by customers at home and abroad. In future, we would like to establish our marketing network overseas and expand the business further.
Company Advantages
1. Euromicron Mould plastic molding manufacturing has undergone a series of tests. These tests include voltage compatibility test, electromagnetic safety test, frequency stability test, plug safety test, etc.
2. The product meets the highest level of quality and safety.
3. All workers of Euromicron Mould Engineering Limited are well trained for manufacturing.
4. Euromicron Mould is recognized as the premier plastic prototype provider in this industry.


Part Name:Gateway
Part size:175*136*32mm
Raw Material:ABS+PC
Color:RAL9010,White
Mould Cavity No.:1*1
Injection gate:Hot runner with pin point gate
Surface finished: Mirror Polishing
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:180T
Cycle time:35S
Mold life:300000 shots
Customer:HEKATR@N
Export:Germany


◇◆ Summary for project running
This product used for electrical appliance,the gateway case and grid.Plastic raw material need in inflaming retarding and heat resistant.
Euromicron Mould electronic plastic prototype supplier for andon electronics-1

We carried out first trial shot on 40th day,little longer than planed.Since YUDO hot runner system came out of expected date,one week late.Three trial shots for samples production,and finished whole project in 50days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request.
Both parts critical surface need in high polishing,mirror grade,no any marked or scratch allowed.When production,have to take out by robot hand,and cover PE film for protection. Silkscreen also made by EMM factory.

Euromicron Mould electronic plastic prototype supplier for andon electronics-2

At first trial shot,case part came out with obvious sink mark and scratch on side surface. The ribs inside are too thick cause sink mark,and no draft angle on side surface cause scratch when mold open.Finally We cut rib material solved sink mark problem.But no draft angle allowed on side surface,we had to add two sliders on both side,to ensure all outside surface look glossy.
The grid part has many small window and only 0.6mm thick.We found flowing mark at each window corner and short shot problem at first trial shot.Then we suggested change high polishing surface to fine texture,VDI3400-33,also change injection gate location,from both side for filling.Customer confirmed and part came out look good.




Company Features
1. Euromicron Mould has rich experience in manufacturing and providing plastic prototype .
2. We have been supplying products to clients in North Amerca, Europe, South Africa, and Asia for many years. And most of those clients have become our stable partners and friends in business cooperations.
3. Euromicron Mould brand commits to the wonderful vision of being a competitive plastic enclosure manufacturer. Inquire! A professional technical support team form electronic housing is standing behind, ready to help you at any time. Inquire! Euromicron Mould will continue to improve productivity and production quality and provide innovative products. Inquire!
The manufacturing of Euromicron Mould plastic molding manufacturing covers some basics steps. They are the research based on feet shape, CAD design, material cutting, stamping, sewing, and stitching, and assembly. It is the perfect companion for a multitude of businesses, including sign makers, woodworkers, exhibition stand manufacture and general fabrication
Many factors have been considered in the design of Euromicron Mould plastic molding manufacturing. They are foot proportion, foot types, supportive point, comfort level, and distribution of stress and weight. Endowed with electrical safety, it allows for maximum operator safety
The design principles of Euromicron Mould electronic housing are flexible. They define how to arrange the elements including lines, shape, colors, and texture appropriately and make them match each other harmoniously. It is granted with certifications such as CE and FDA
The packaging of Euromicron Mould plastic molding manufacturing will be inspected for potential quality issues. It will be checked in terms of the polybag sealing method, polybag size, appropriate labeling, barcodes, and price tags. It always receives attention at exhibitions such as Indonesia industrial machinery and electronic products exhibition
Euromicron Mould plastic molding manufacturing will be tested in a strict manner to meet quality requirements for furniture. It will be tested for wear resistance, stain resistance, structural stability, edges treatment, and chemical resistance. It can be designed with a pointer for perfectly aligning the material before starting work
This product can store energy reasonably well for a long time with low self-discharge. It will not be affected by outer elements such as temperature, moisture, vibration, shock, etc. It is suited for the use of rotary devices, allowing one to engrave cylindrical objects
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...