quick delivery plastic enclosure box electronic wholesale for andon electronics

Euromicron Mould electronic plastic enclosure box wholesale for andon electronics-1

Euromicron Mould electronic plastic enclosure box wholesale for andon electronics-2

◇◆ Product parameters

Part Name:	socket
Part size:	525259mm
Raw Material:	ABS
Color:	Grey
Mould Cavity No.:	1*2
Injection gate:	Cold runner with sub gate
Surface finished:	VDI3400-33
Core &Cavity steel:	1.2344,hardness 48~52HRC
Mold component standard:	DME or equivalent
Injection machine size:	180T
Cycle time:	35S
Mold life:	100000 shots
Customer:	Siemens
Export:	Uruguay

◇◆ PRODUCT FEATURES

Euromicron Mould electronic plastic enclosure box wholesale for andon electronics-3

Molded part

This socket has two slots on the two opposite sides close to the back wall.No witness marks from side sores or slides are permitted on the outer surface of the box between the upper edge and these openings.On the other had,sink marks are not allowed near the openings on both the side walls and inside of the box,since these areas are visible once the box is installed.

Mold design

The core of the mold,four small side holes are of conventional design.All remaining components are standard or off-the-shelf items.For instance,a standard mold base with dimensions of 200mmX300mm is employed.The mold shut height is 311mm,Plate thickness are also based on standard dimensions.
Steel grade 1.2344,through-hardened 48-52HRC,was employed for the mold cavity and core.An inner core with helical grooves provides cooling for the stationary-side mold plate. Given the art geometry and the requirement that there be no witness lines on the outside surface,the side cores for the round openings must be placed on the stationary side mold plate.
The ejector plate assembly is actuated by the ejector rod,which is connected to the injection machine ejector,All guiding and wear components have been treated with DME standard.

d******y

The production of plastic enclosure box always takes electronic communication equipment into account. Its function of heat resistance makes it popular among different fields

f******i

Our electronic communication equipment are constantly updated to follow the trend. It is excellent in permeability resistance and enjoys good flexibility

h******p

electronic communication equipment produced by Euromicron Mould Engineering Limited are mainly characterized by their plastic enclosure box. Its longitudinal strength has been improved a lot

c******o

The material of plastic enclosure box allows electronic communication equipment to make itself electronic communication equipment.

w******n

The special composition of plastic enclosure box makes it obtain good performance of electronic communication equipment. Because of the high-quality glass melting process and molding process, it enjoys high strength

s******k

Our plastic enclosure box not only has excellent quality, but also has an affordable price, and the overall cost performance is relatively high.

Product Message

*Name

Phone

*E-mail

*Content

CONTACT US

China headquarters:
EMAIL: kenny.he@euromicronmould.com
TEL : (+86) 0755-29441759

FAX : 0755-29190865
Office Add : No. 1408, DreamLand Times Building, HePing East Rd, LongHua County, ShenZhen, GuangDong, China 518109.

Factory 1 : No.2 FuRong 3 Road ShaJing Bao’an District,ShenZhen,China 518104.

Factory 2: Building 12, No.2 Xingye Road, Songshan Lake Park, Dongguan, Guangdong, China 523000

SKYPE : hezhenghualik

Germany office: Max-Planck-Str. 2 Geb.F4
D-21502 Geesthacht Schleswig-Holstein Germany

Contact: Dominic Zhou

Tell: +49 04152 889188

Email: de@euromicromould.com

CONTACT PERSON

Marketing :

info@euromicronmould.com

General Manager :

kenny.he@euromicronmould.com

Manufacturing Director :

Michael@euromicronmould.com

Sitemap

Euromicron Mould electronic plastic enclosure box wholesale for andon electronics