Euromicron Mould Engineering Limited was found in 1995

Home  >  Customized Application  >  Electrommunication For sell  >  Euromicron Mould electronic custom plastic cases for electronics wholesale for electronic components
Euromicron Mould electronic custom plastic cases for electronics wholesale for electronic components

Euromicron Mould electronic custom plastic cases for electronics wholesale for electronic components

Product Name
Electronic connector
Product size
35*29.5*26mm
Material
PA9T30GF
Cavity
1*4
Cycle time
40S
Customer
Bitron
Export
Italy
Company Advantages
1. While designing Euromicron Mould custom plastic cases for electronics , we uphold the principles of innovation and functionality. The product is processed by about 400 staff with many years of experience
2. High quality service going with elaborate communication processor can keep Euromicron Mould more competitive. The product can be applied in many industries, such as the automobile, house appliance, and medical industry
3. Surveys show that our communication processor are widely used in custom plastic cases for electronics field with such properties as plastic enclosure for electronic products . It is suitable for use in the high-temperature environment


This connector was supposed to be molded in glass-fiber-reinforced,flame-retardant nylon.
It came with size 35X29.5X26mm,with 40pcs pins in center.High rib,hooks and boss on round side.One four cavity mold should employ a mold base dimension 250*230mm,with 280mm height.Steel grade 1.2767 is used for the mold inserts,while grade 1.2312 is employed for mold plates as well as the ejector plate.Steel grade 1.1730 is mused for remaining plate and rails.Thermal insulating plates,which are available in sizes to match the standard mold plates,serve to insulate the mold from the machine platens.



◇◆ Mold design


This part is simple,but need to ensure 40pcs pin locate properly when plastic filling,specially under high pressure flow.To save production cost,we need to cut down cycle time.So two or three even more over-mold inserts need.Injection machine operator no need to set pin one by one into mold.Just need to set in additional insert before molding.When mold open,just need put whole insert with pin into core.Of course,operator need to take part with insert together.The hooks on both sides are undercut,need design for slider or angle lifter.But no slider split line allow in middle surface.So split line should be set on radius of corner.

The molded part is ejected via knockout pins.In addition to providing for ejection.these pins serve to vent the cavity during filling.It is in part for this reason that the knockout pins are located beneath ribs and other deep section of the part.where entrapped air is to be expected.The mold filling pattern during injection of the molding compound as well as the mechanical and thermal aspects of the mold design were simulated and established during the design phase with the aid of appropriate computer programs.



Company Features
1. We have a modern factory. It gets prudent investments continuously with the latest equipment and state-of-the-art facilities, making us a true extension of customers’ manufacturing operations.
2. A keen sense of customer service is an essential value for our company. This value will inspire and guide our daily behavior, encouraging us to make every effort to prioritize and meet the needs of our clients. Get price!
Chat Online 编辑模式下无法使用
Chat Online inputting...