Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould electronic custom plastic box manufacturer for electronic components
Euromicron Mould electronic custom plastic box manufacturer for electronic components

Euromicron Mould electronic custom plastic box manufacturer for electronic components
  • Euromicron Mould electronic custom plastic box manufacturer for electronic components
  • Euromicron Mould electronic custom plastic box manufacturer for electronic components
  • Euromicron Mould electronic custom plastic box manufacturer for electronic components
  • Euromicron Mould electronic custom plastic box manufacturer for electronic components
  • Euromicron Mould electronic custom plastic box manufacturer for electronic components

Euromicron Mould electronic custom plastic box manufacturer for electronic components

The product causes no harm. During the production, only the low or no volatile organic compounds (VOCs) are used, and any formaldehyde is excluded.
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
Euromicron carries out strict quality monitoring and cost control on each production link of die casting mold, from raw material purchase, production and processing and finished product delivery to packaging and transportation. This effectively ensures the product has better quality and more favorable price than other products in the industry.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Compared with same kind of products in the industry, die casting mold has the following highlights due to the better technical capability.
  • v s
Company Advantages
1. Euromicron Mould custom plastic box will go through a complete analysis. The analysis includes safety, the mechanical performance of components, overall operational efficiency, and so forth.
2. The product causes no harm. During the production, only the low or no volatile organic compounds (VOCs) are used, and any formaldehyde is excluded.
3. The product has a promising application prospect and tremendous market potential.


Euromicron Mould electronic custom plastic box manufacturer for electronic components-1
Euromicron Mould electronic custom plastic box manufacturer for electronic components-2


◇◆ Product parameters


Part Name:Electronic connector
Part size:45*39.5*21mm
Raw Material:PA9T30GF
Color:RAL9005,Black
Mould Cavity No.:1*4
Injection gate:Hot runner 
Surface finished: VDI3400-33
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:250T
Cycle time:40S
Mold life:100000 shots
Customer:Bitron
Export:Italy


◇◆ PRODUCT FEATURES
A connector shell was supposed to be molded in glass-fiber-reinforced,flame-retardant nylon.
Euromicron Mould electronic custom plastic box manufacturer for electronic components-3

This connector include two different parts(upper and lower halves),were to be produced in a single mold.Prior to the start of production,the question arose as to whether a second gate might not be required to fill the part.To avoid weld lines and entrapped air.however,it might also be necessary to use only a single gate.This flexibility as to gating was supposed to be possible simple by switching a hot runner nozzle on or off.A further difficulty resulted from the small amount of space in which  the gates were to be located on the face of the molded part.All of these requirements were satisfied through the particular arrangement of the conductive,internally heated hot-runner system.

Euromicron Mould electronic custom plastic box manufacturer for electronic components-4

Mold design-We made this mold with four cavity.Runner system consists of a heated sprue bushing,a hot-runner manifold and four hot-runner nozzles.The hot-runner nozzles have not been installed parallel to the longitudinal axis of the mold,but rather at an angle.In spite of the unfavorable geometric relationships,it is possible to gate each part on its face in this manner.This arrangement is possible,because the solidified melt in the outer regions of the hot-runner manifold and nozzle channels precludes any possibility of leakage.Each of the hot-runner nozzle is individually controlled and can thus be switched on or off as required.It is thus possible to fill the part through either on or two gates.These measures alone,however,would not have been adequate to vary the gating possibilities.Attention also have to be given to the hot-runner manifold to ensure that no melt stagnated at continuously high temperatures in the runner channels when the various gating possibility were being employed.




Company Features
1. Euromicron Mould Engineering Limited has many years of comprehensive experience in designing and manufacturing plastic molding manufacturing . We have acclaimed customer service.
2. Our factory has advanced manufacturing equipment. In addition to providing better security features for our own employees, they can also bring faster speed and higher productivity.
3. We have adopted the policies for sustainability. We use the newest technologies and methods to produce our products, reducing emissions and increasing recycling. We are committed to being a global manufacturer that develops and creates wealth for customers, employees, and communities within the framework of ethical behavior. We advance sustainable manufacturing practices for environmental, manufacturing, and economic benefit. We yield net energy and production waste reductions.
Euromicron Mould plastic molding manufacturing has a secured source of raw materials. Made of quality materials, this product is soft and comfortable to touch
custom plastic box design determines the final form of custom plastic box from Euromicron Mould Engineering Limited. It acts as an expression of women's tastes
Euromicron Mould plastic molding manufacturing is designed in accorance with the basic production standard. This product perfectly outlines the curve of women's bodies
Euromicron Mould plastic molding manufacturing is designed by the concerted effort of strong R&D team and design team. It can be worn again and again without worrying will lose its shape
In order to be the leading plastic molding manufacturing manufacturers, our experts also focuses on its design. This product is available in a variety of colors
With the assistance of custom plastic box, custom plastic box has gained its popularity in the market. By wearing this product, it will help women achieve a continuously stylish look
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...