Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould corporation communication processor customized for electronic components
Euromicron Mould corporation communication processor customized for electronic components

Euromicron Mould corporation communication processor customized for electronic components
  • Euromicron Mould corporation communication processor customized for electronic components
  • Euromicron Mould corporation communication processor customized for electronic components
  • Euromicron Mould corporation communication processor customized for electronic components
  • Euromicron Mould corporation communication processor customized for electronic components
  • Euromicron Mould corporation communication processor customized for electronic components

Euromicron Mould corporation communication processor customized for electronic components

Euromicron Mould communication processor is safe as it is made of high quality materials. The product can be applied in many industries, such as the automobile, house appliance, and medical industry
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. Euromicron Mould communication processor is safe as it is made of high quality materials. The product can be applied in many industries, such as the automobile, house appliance, and medical industry
2. Euromicron Mould Engineering Limited's well-equipped facilities and excellent quality control throughout all stages of production enable us to guarantee total customer satisfaction. Its structure proves to be firm and stable
3. Durability is one of the most outstanding features of this product. Its fabrics have the ability to resist wear through continual use. Supported by the world-class manufacturing management system, it is of stable quality


Euromicron Mould corporation communication processor customized for electronic components-1
Euromicron Mould corporation communication processor customized for electronic components-2


◇◆ Product parameters


Part Name:Electronic connector
Part size:45*39.5*21mm
Raw Material:PA9T30GF
Color:RAL9005,Black
Mould Cavity No.:1*4
Injection gate:Hot runner 
Surface finished: VDI3400-33
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:250T
Cycle time:40S
Mold life:100000 shots
Customer:Bitron
Export:Italy


◇◆ PRODUCT FEATURES
A connector shell was supposed to be molded in glass-fiber-reinforced,flame-retardant nylon.
Euromicron Mould corporation communication processor customized for electronic components-3

This connector include two different parts(upper and lower halves),were to be produced in a single mold.Prior to the start of production,the question arose as to whether a second gate might not be required to fill the part.To avoid weld lines and entrapped air.however,it might also be necessary to use only a single gate.This flexibility as to gating was supposed to be possible simple by switching a hot runner nozzle on or off.A further difficulty resulted from the small amount of space in which  the gates were to be located on the face of the molded part.All of these requirements were satisfied through the particular arrangement of the conductive,internally heated hot-runner system.

Euromicron Mould corporation communication processor customized for electronic components-4

Mold design-We made this mold with four cavity.Runner system consists of a heated sprue bushing,a hot-runner manifold and four hot-runner nozzles.The hot-runner nozzles have not been installed parallel to the longitudinal axis of the mold,but rather at an angle.In spite of the unfavorable geometric relationships,it is possible to gate each part on its face in this manner.This arrangement is possible,because the solidified melt in the outer regions of the hot-runner manifold and nozzle channels precludes any possibility of leakage.Each of the hot-runner nozzle is individually controlled and can thus be switched on or off as required.It is thus possible to fill the part through either on or two gates.These measures alone,however,would not have been adequate to vary the gating possibilities.Attention also have to be given to the hot-runner manifold to ensure that no melt stagnated at continuously high temperatures in the runner channels when the various gating possibility were being employed.




Company Features
1. Euromicron Mould Engineering Limited is a leading supplier of high quality communication processor in the global market.
2. Euromicron Mould enjoys good reputation for its highly advanced technology.
3. Euromicron Mould Engineering Limited will continue to pursue excellence. Check it!
Euromicron Mould custom plastic enclosures is designed by our experts bringing the latest concepts into the designing process. Having passed over a 48-hour salt spray test, it is 100% corrosion resistant
The raw materials used in the production of Euromicron Mould custom plastic enclosures are of premium quality. Undoubtedly, the product is totally flame retardant
With the assistance of skilled professionals, the production of Euromicron Mould custom plastic enclosures is carried out according to the principles of lean production. The product has popular features which include fire resistance
The new type of Euromicron Mould custom plastic enclosures designed by our experts is very attractive and practical. It has passed the tests performed by the National Electrical Control and Distribution Equipment Quality Supervision Testing Center
custom plastic enclosures is built using standard materials procured from trusted vendors of the market. It has both electrical insulation and mechanical properties
All defects of the product have been accurately detected and then removed, guaranteeing consistent quantity. The product is less prone to aging
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...