Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould connector plastic prototype customized for electronic components
Euromicron Mould connector plastic prototype customized for electronic components

Euromicron Mould connector plastic prototype customized for electronic components
  • Euromicron Mould connector plastic prototype customized for electronic components
  • Euromicron Mould connector plastic prototype customized for electronic components
  • Euromicron Mould connector plastic prototype customized for electronic components

Euromicron Mould connector plastic prototype customized for electronic components

Euromicron Mould has always topped and will continue topping the plastic prototype market.
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Details
With a focus on quality, Euromicron pays great attention to the details of cnc service.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Well-chosen in material, fine in workmanship, excellent in quality and favorable in price, Euromicron's cnc service is highly competitive in the domestic and foreign markets.
Company Advantages
1. Euromicron Mould custom plastic cases for electronics is exclusively developed with good phone adaptability by the R&D team. It has been proved that it meets safety requirement.
2. A good quality control system and management system ensure the quality of the product.
3. Abundant talent reserves and superior design capabilities for plastic prototype are the primary force of Euromicron Mould Engineering Limited's rapid development.
4. Things will never happen that plastic prototype gets damaged during transportation because of our packing.


Part Name:Gateway
Part size:175*136*32mm
Raw Material:ABS+PC
Color:RAL9010,White
Mould Cavity No.:1*1
Injection gate:Hot runner with pin point gate
Surface finished: Mirror Polishing
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:180T
Cycle time:35S
Mold life:300000 shots
Customer:HEKATR@N
Export:Germany


◇◆ Summary for project running
This product used for electrical appliance,the gateway case and grid.Plastic raw material need in inflaming retarding and heat resistant.
Euromicron Mould connector plastic prototype customized for electronic components-1

We carried out first trial shot on 40th day,little longer than planed.Since YUDO hot runner system came out of expected date,one week late.Three trial shots for samples production,and finished whole project in 50days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request.
Both parts critical surface need in high polishing,mirror grade,no any marked or scratch allowed.When production,have to take out by robot hand,and cover PE film for protection. Silkscreen also made by EMM factory.

Euromicron Mould connector plastic prototype customized for electronic components-2

At first trial shot,case part came out with obvious sink mark and scratch on side surface. The ribs inside are too thick cause sink mark,and no draft angle on side surface cause scratch when mold open.Finally We cut rib material solved sink mark problem.But no draft angle allowed on side surface,we had to add two sliders on both side,to ensure all outside surface look glossy.
The grid part has many small window and only 0.6mm thick.We found flowing mark at each window corner and short shot problem at first trial shot.Then we suggested change high polishing surface to fine texture,VDI3400-33,also change injection gate location,from both side for filling.Customer confirmed and part came out look good.




Company Features
1. Euromicron Mould has always topped and will continue topping the plastic prototype market.
2. Euromicron Mould has a strong design and development team.
3. Strengthening the capabilities of custom plastic cases for electronics and service plays an important role in keeping sustainable development of Euromicron Mould. Call now! Euromicron Mould Engineering Limited will actively seek substantive breakthroughs in plastic enclosures for electronics for communication processor . Call now!
Quality checking for Euromicron Mould plastic enclosures for electronics has bee conducted after production. The inspection covers mainly style details, general appearance, workmanship, measurements, fabric quality, printing, and washing quality. Staff working in Jiabang are all well-trained
Euromicron Mould plastic prototype is created awash with the latest fashion designing trends. Trends include bold colors, a fusion of various style elements, fancy shapes, and so forth. We are quality-oriented in Jiabang
Euromicron Mould custom plastic cases for electronics has to go through some industry-related tests. These tests are softness testing, breathability testing, wear resistance testing, odor resistance testing, and hypoallergenic property testing. Jiabang’s products can be widely used in garden, balcony, patios and other exterior or interior places
Euromicron Mould custom plastic cases for electronics undergoes a series of tests. These tests are aimed to testify its abrasion resistance, impact resistance, scratch resistance, chemical resistance, etc. Situated in Foshan city of China, our factory covers an area of 2,000 square meters
Euromicron Mould plastic prototype has passed a wide range of tests. It has been tested in terms of resistance to water penetration, fuel oil, fat, hot contact, discoloration, color transfer, and cracking. Jiabang have developed full range of decking tiles like ceramic, natural stone, WPC, artificial grass and etc
With such features as plastic prototype, custom plastic cases for electronics is worth being popularized. Staff working in Jiabang are all well-trained
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...