Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould coagulation Plastic Monitoring shell supplier for trader
Euromicron Mould coagulation Plastic Monitoring shell supplier for trader

Euromicron Mould coagulation Plastic Monitoring shell supplier for trader
  • Euromicron Mould coagulation Plastic Monitoring shell supplier for trader
  • Euromicron Mould coagulation Plastic Monitoring shell supplier for trader
  • Euromicron Mould coagulation Plastic Monitoring shell supplier for trader

Euromicron Mould coagulation Plastic Monitoring shell supplier for trader

The design of Euromicron Mould Plastic Monitoring shell adopts the advanced technologies and software which include computer-aided design (CAD), computer-aided modeling (CAM), etc. The product does not contain any harmful plastic or wax lining
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


Product Name:monitoring shell 
Product size:607*559*461mm 
Part visible surface:Texturing
Product material:PC+ABS
Shrinkage rate %:0.6
Cavity quantity:1*1
Injection machine type:500T
Cycle time:45S
Product Take out way:Manipulator/Cupula
Cooling system:cold runner
Cavity and core steel:718H
Mold base standard:HASCO
Terminal Customer:Siemens 
Export:Germany


◇◆ Product Features
Euromicron Mould coagulation Plastic Monitoring shell supplier for trader-1

In this set of products, the surface shell mold can adopt large nozzle mold or hot nozzle to cool the flow channel mold, which can not only meet customer requirements but also reduce the cost of the mold;
Among them, the way of glue injection is diving, but the glue inlet is different from the common conical shape but similar to duck mouth shape, which can reduce the pressure of glue injection and prevent shrinkage lines.
This product made in ABS+PC material, which can improve the heat resistance, impact resistance and tensile properties of ABS and enable ABS to be used in high-end fields.
On the other hand, it can reduce the melt viscosity of PC, improve the fluidity of PC, improve its processing performance, reduce the internal stress of products, reduce the sensitivity of impact strength to gap and thickness, so that PC can be used for the manufacture of thin-wall long process products.

Euromicron Mould coagulation Plastic Monitoring shell supplier for trader-2

Since the front mold of this product has bone position and screw column, in order to prevent adhesion of the front mold, the slider can be used in the middle part of the product to force the rear mold.
In the aspect of medical product assembly, it is best to be supplemented by hot-melt method, or adopt the method of fastening seal and front shell as a whole to strengthen the degree and increase the tightness. All external interfaces shall be protected and sealed by rubber protective cover to prevent internal pollution of the product.




The production process of Euromicron Mould Plastic Monitoring shell is continuously inspected by our QC team to make sure that product quality is in line with garment standards and regulations. The water-based ink and glue used in the product comply with the food contact materials regulations
The production of Euromicron Mould Plastic Monitoring shell is rigorously undertaken by the factory itself, inspected by the third-party authorities. Especially the inner parts, such as food trays, are required to pass the tests including chemical release testing and high-temperature withstanding capacity. Its thickness can be customized, ranging from 150gram to 350gram
Euromicron Mould Plastic Monitoring shell is completed by our professional architects and engineers who consider every project carefully such as the location, topography, climate, and culture. It hasn't processed by toxic bleach agents
Euromicron Mould Plastic Monitoring shell is carried out by our designers who aim to maintain and improve the lifestyle of customers by delivering the most effective and innovative wellness sauna product. The product has excellent cold and high-temperature stability
The hardware components of Euromicron Mould Plastic Monitoring shell have been tested by a third-party testing organization, passing the FCC, CE and ROHS safety certification. It will not break or tear easily
It is thoroughly inspected to ensure zero defects. The product serves as disposable tableware, offering people great convenience
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...