Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  > 

AI - Page Sitemap

 > 

Euromicron Mould coagulation canada medical from China for hospital

Euromicron Mould coagulation canada medical from China for hospital

Euromicron Mould coagulation canada medical from China for hospital

Product Name
monitoring shell
Product size
607*559*461mm
Export
Germany
Part visible surface
Texturing
Product material
PC+ABS
Cavity quantity
1*1
Injection machine type
500T
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. The production of Euromicron Mould medical equipment parts manufacturers meets the building industry's critical standards and regulations including the latest safety science and environmental certifications. It is suitable for use in the high-temperature environment
2. This product is adjusted to different situations and occasions. It keeps its appearance as bright and clean as a new one after long-term use
3. Based on the research practice for many years, canada medical which has medical equipment parts manufacturers was designed. The complete after-sales service system is rendered for the product to maximize customer value
4. The quality control technicians perform quality control checks on every article before shipment. Its design is supported by the professional project engineers who follow up the specific progress


Product Name:monitoring shell 
Product size:607*559*461mm 
Part visible surface:Texturing
Product material:PC+ABS
Shrinkage rate %:0.6
Cavity quantity:1*1
Injection machine type:500T
Cycle time:45S
Product Take out way:Manipulator/Cupula
Cooling system:cold runner
Cavity and core steel:718H
Mold base standard:HASCO
Terminal Customer:Siemens 
Export:Germany


◇◆ Product Features
Euromicron Mould coagulation canada medical from China for hospital-1

In this set of products, the surface shell mold can adopt large nozzle mold or hot nozzle to cool the flow channel mold, which can not only meet customer requirements but also reduce the cost of the mold;
Among them, the way of glue injection is diving, but the glue inlet is different from the common conical shape but similar to duck mouth shape, which can reduce the pressure of glue injection and prevent shrinkage lines.
This product made in ABS+PC material, which can improve the heat resistance, impact resistance and tensile properties of ABS and enable ABS to be used in high-end fields.
On the other hand, it can reduce the melt viscosity of PC, improve the fluidity of PC, improve its processing performance, reduce the internal stress of products, reduce the sensitivity of impact strength to gap and thickness, so that PC can be used for the manufacture of thin-wall long process products.

Euromicron Mould coagulation canada medical from China for hospital-2

Since the front mold of this product has bone position and screw column, in order to prevent adhesion of the front mold, the slider can be used in the middle part of the product to force the rear mold.
In the aspect of medical product assembly, it is best to be supplemented by hot-melt method, or adopt the method of fastening seal and front shell as a whole to strengthen the degree and increase the tightness. All external interfaces shall be protected and sealed by rubber protective cover to prevent internal pollution of the product.




Company Features
1. Euromicron Mould Engineering Limited has solid technical strength and abundant engineering experience.
2. The company aims to benefits every customer by providing them the high-quality product and sincere customer service. We always strive hard to meet their real needs. Get info!
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...