Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould citroen www automobile one-stop service supplier for merchant
Euromicron Mould citroen www automobile one-stop service supplier for merchant

Euromicron Mould citroen www automobile one-stop service supplier for merchant
  • Euromicron Mould citroen www automobile one-stop service supplier for merchant
  • Euromicron Mould citroen www automobile one-stop service supplier for merchant

Euromicron Mould citroen www automobile one-stop service supplier for merchant

In the past years, Euromicron Mould Engineering Limited focuses attention on the manufacture of custom injection molding companies . We have been recognized as one of the most powerful manufacturers based in China. Euromicron Mould Engineering Limited carries the strict quality standard for our www automobile in our production.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. Euromicron Mould custom injection molding companies has a unique design. Various factors, such as environmental, social, functional and contextual factors are considered to design this product. Made of well-selected materials, the product has a long service life
2. This product helps an individual in appearing visually attractive. It helps him or her to generate a positive first impression on less familiar people. Its design is supported by the professional project engineers who follow up the specific progress
3. Our www automobile can work for non-stop 24 hours. The product has an output of 50 sets per month
4. The rigorous testing procedures ensure that the product quality is consistently at its best. Fast shipment is guaranteed for the product to improve customer satisfaction


This trail mold was used to injection Auto door plastic part in different thermoplastics, such as  PC/ABS blend and modified PA, elastomer-modified PC, PC/PBTP blend and modified PBTTB for a number of manufacturing companies.
The two-cavities mold for Auto door plastic part consists essentially of sprue half with the hot runner system and the ejector mold half. Pillars and bushings serve to guide the two mold halves. When the mold is closed. The mold halves are fixed relative to each other via angled surfaces and wear plates.
Gating and temperature control. The molding compound passes through a sprue bushing into the hot runner made of steel (material number 1.2311). From four heated nozzles, also of steel (material number 1.2162), it passes through cold feed channels to the various gates of the mold cavity. The gates measure 15 mm X 1.2 mm.

Euromicron Mould citroen www automobile one-stop service supplier for merchant-1

The hot runner manifold block is heated by cartridge heaters which are pressed against it by laterally bolted cover strips. The distributor lies in a recess of the feed-side mold plate and is pressed by the hot runner covering plate against the nozzles via spacer rings. Guide components prevent the manifold from twisting about the locating device. They also allow the manifold to expand and contract during heating and cooling. The hot runner nozzles are each centered in their locator bores in mold plate by means of three contact surfaces in such a way that they do not experience the expansion and contraction undergone by the manifold. The contact surfaces facing the manifold are convex. Transfer areas for the molding compound are sealed with steel O-rings. The ends of the hot runner nozzles on the mold side have conical bores. In this region. Their exteriors fit snugly into the mold platen to ensure good thermal conduction and thus rapid cooling of the sprue formed therein.

On mold opening, the frozen sprue separates from the hot melt in the manifold at the narrowest point of the conical bore. The nozzles are heated with heating collars. Two temperature probes are attached to each nozzle to monitor and regulate the temperature. The cartridge heaters in the manifold are arranged in seven groups, each of which is individually regulated. The cartridges have an installed rating of about 40 KW.
The melt pressure in the manifold is registered by pressure sennsor P. and that in the cavity, by sensor P. and cann therefore be used for control purposes. The temperature-control system consists of a network of bores in the two mold hales. Heat sensors T measure the temperature in the mold.
Ejection of the Auto door plastic part
When the mold opens, the molded part remains in the moving half. The sprues are also held in place by sprue pullers above the ejector pins. As soon as the stripper plates are pushed forward by the ejector of the machine, the ejector pins push the molded part along with the sprues from the mold core. On mold closing, the ejector plates and thus also the ejector pins are pushed back by ejector-plate return pins. The mold plate is supported by rolls projecting right through the ejector plates to the clamping plate.



Company Features
1. In the past years, Euromicron Mould Engineering Limited focuses attention on the manufacture of custom injection molding companies . We have been recognized as one of the most powerful manufacturers based in China. Euromicron Mould Engineering Limited carries the strict quality standard for our www automobile in our production.
2. Constructing the advanced technology is the only way for Euromicron Mould to break the bottleneck in car body parts industry.
3. Euromicron Mould Engineering Limited has professional R&D team and management team, and currently has several national patents. Euromicron Mould Engineering Limited hopes to become a listed company with the greatest investment value. Call now!
Euromicron Mould www automobile is developed to achieve high efficiency. New photodecomposition technology is used to make this product more effective in transforming sunlight into power energy. With sorted menu and operation manner similar to PC, it can be conveniently and simply operated
Euromicron Mould www automobile is developed with the help of advanced solar technology. It adopts the comprehensive technical system which specially caters to the working principle of solar power generation. The product has achieved the maintenance-free performance
Euromicron Mould custom injection molding companies is manufactured by utilizing advanced machines. It is processed by a CNC cutting machine, electrical oven, polishing machine, etc. The product enjoys high resistance to vibration
The quality of Euromicron Mould custom injection molding companies can be guaranteed by its hygienic license issued by the Health Supervision Department. Both its physical and chemical filtration systems are in line with the standards required in the pure drinking water. A high-temperature and high-pressure system inside the product speeds up the reaction process, therefore improving the work efficiency
Euromicron Mould custom injection molding companies will be tested once it's finished. It has been sprayed with different kinds of liquid for quality test and it proved that it is not affected by those liquids. It supports multi-channel measurements in water samples
This product has a timer that can automatically turn off once the drying is finished, which prevents the food from over drying or scorch. The product enjoys high resistance to vibration
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...