Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould citroen es automobile renovation solutions for businessman
Euromicron Mould citroen es automobile renovation solutions for businessman

Euromicron Mould citroen es automobile renovation solutions for businessman
  • Euromicron Mould citroen es automobile renovation solutions for businessman
  • Euromicron Mould citroen es automobile renovation solutions for businessman

Euromicron Mould citroen es automobile renovation solutions for businessman

In the past few years, Euromicron Mould has developed into a major es automobile brand.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. Euromicron Mould top injection molding companies is manufactured in an environmental-friendly way. Its materials or parts are all sustainable and eco-friendly, featuring fine biodegradability. Vacuum packing method is adopted for the product to avoid mold rusting during transportation
2. Euromicron Mould Engineering Limited aims to build the most professional es automobile company in China. With the development of science and technology, the product is upgraded quickly
3. Our qualified team strictly implements checks on each testing procedure. The product is processed by about 400 staff with many years of experience
4. The product is thoroughly inspected by our QC team to rule out every possibility of defects. The product is easy to assemble and maintain


This trail mold was used to injection Auto door plastic part in different thermoplastics, such as  PC/ABS blend and modified PA, elastomer-modified PC, PC/PBTP blend and modified PBTTB for a number of manufacturing companies.
The two-cavities mold for Auto door plastic part consists essentially of sprue half with the hot runner system and the ejector mold half. Pillars and bushings serve to guide the two mold halves. When the mold is closed. The mold halves are fixed relative to each other via angled surfaces and wear plates.
Gating and temperature control. The molding compound passes through a sprue bushing into the hot runner made of steel (material number 1.2311). From four heated nozzles, also of steel (material number 1.2162), it passes through cold feed channels to the various gates of the mold cavity. The gates measure 15 mm X 1.2 mm.

Euromicron Mould citroen es automobile renovation solutions for businessman-1

The hot runner manifold block is heated by cartridge heaters which are pressed against it by laterally bolted cover strips. The distributor lies in a recess of the feed-side mold plate and is pressed by the hot runner covering plate against the nozzles via spacer rings. Guide components prevent the manifold from twisting about the locating device. They also allow the manifold to expand and contract during heating and cooling. The hot runner nozzles are each centered in their locator bores in mold plate by means of three contact surfaces in such a way that they do not experience the expansion and contraction undergone by the manifold. The contact surfaces facing the manifold are convex. Transfer areas for the molding compound are sealed with steel O-rings. The ends of the hot runner nozzles on the mold side have conical bores. In this region. Their exteriors fit snugly into the mold platen to ensure good thermal conduction and thus rapid cooling of the sprue formed therein.

On mold opening, the frozen sprue separates from the hot melt in the manifold at the narrowest point of the conical bore. The nozzles are heated with heating collars. Two temperature probes are attached to each nozzle to monitor and regulate the temperature. The cartridge heaters in the manifold are arranged in seven groups, each of which is individually regulated. The cartridges have an installed rating of about 40 KW.
The melt pressure in the manifold is registered by pressure sennsor P. and that in the cavity, by sensor P. and cann therefore be used for control purposes. The temperature-control system consists of a network of bores in the two mold hales. Heat sensors T measure the temperature in the mold.
Ejection of the Auto door plastic part
When the mold opens, the molded part remains in the moving half. The sprues are also held in place by sprue pullers above the ejector pins. As soon as the stripper plates are pushed forward by the ejector of the machine, the ejector pins push the molded part along with the sprues from the mold core. On mold closing, the ejector plates and thus also the ejector pins are pushed back by ejector-plate return pins. The mold plate is supported by rolls projecting right through the ejector plates to the clamping plate.



Company Features
1. In the past few years, Euromicron Mould has developed into a major es automobile brand.
2. automobile gebrauchte autos is made by our best technology.
3. Euromicron Mould Engineering Limited will enhance its sales network in the future. Call now!
top injection molding companies, designed by our professional design experts, are very popular in the industry. JLH Mattress offers the professional OEM and ODM service for you
Thanks to the upgrading technology and creative ideas, the design of top injection molding companies is especially unique in this industry. Manufactured by strict quality control, each mattress is highly recommended
Pictures on our es automobile can be customized to meet customer's requirements. Hand-tufted mattress is good enough that could be rolled and compressed in a box
automobile gebrauchte autos's performance is popularly accepted in the country and abroad. The state-of-the-art design of mattress allows muscles to be fully relaxed
es automobile has reached new creative heights with top injection molding companies design. Manufactured by strict quality control, each mattress is highly recommended
The product features great impact strength. It has been measured by allowing a pendulum to strike a grooved machined test piece and measuring the energy absorbed in the break. Hand-tufted mattress is good enough that could be rolled and compressed in a box
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...