Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould by plastic case for electronics customized for andon electronics
Euromicron Mould by plastic case for electronics customized for andon electronics

Euromicron Mould by plastic case for electronics customized for andon electronics
  • Euromicron Mould by plastic case for electronics customized for andon electronics
  • Euromicron Mould by plastic case for electronics customized for andon electronics
  • Euromicron Mould by plastic case for electronics customized for andon electronics
  • Euromicron Mould by plastic case for electronics customized for andon electronics
  • Euromicron Mould by plastic case for electronics customized for andon electronics

Euromicron Mould by plastic case for electronics customized for andon electronics

This cover is part...
Get the latest price
Quantity Needed:
Pieces
E-mail:


This cover is part of an telecom set-top box.
The appearance surface has dimension of 396X56X45mm.There are one round opening ¢35 and one rectangular opening 20X150mm.Also there are many boss and rid in high side.There is undercut on right wall of long side.
Euromicron Mould by plastic case for electronics customized for andon electronics-1
Euromicron Mould by plastic case for electronics customized for andon electronics-2



◇◆ Product Features


Euromicron Mould by plastic case for electronics customized for andon electronics-3
Mold design

We set sprue bushing on round opening,when fill with sub gate from both sides.Ejector sleeve need locate on boss to help release part.Pin or insert for high side rib to help air venting,also for easily manufacture or EMD process.A slider would be need for side undercut.Since all outside surface are visible,no slider split line is allowed.This mean a tunnel slider would be needed on core side.Mold base size would be 600X400mm with height 350mm.The design of the mold provide for simultaneous opening of the two parting lines with the aid of two racks and a pinion for each side.As it is essential that no gate marks show on the front of the molded parts,injection had to take place on the inside.

Euromicron Mould by plastic case for electronics customized for andon electronics-4
Cooling

This cover transfer heat quickly to mold surfaces.so that increased outlay on the cooling system is worthwhile in molds for such parts.Cooling of the core should be given special attention.Also some of the inserts are thin and very high.A beryllium/copper cap with six radial cooing channels is placed on the core insert.These cooling channel require drilling of the center of rube leading to the cap.This drilling weakens the center tube and there is the risk of rupture if the mounting nuts are tightened excessively.Compression spring are provided to permit an exactly defined tightening torque.Coolant is supplied to the cooling channels in the slides via tubes threaded into the slides.Slots in the guide strips allow these tubes to follow the motion of the slides.



Comprehensive tests are carried out on Euromicron Mould plastic case for electronics. These tests help establish product compliance to standards such as ANSI/BIFMA, CGSB, GSA, ASTM, CAL TB 133 and SEFA. JLH mattresses have been exported to over 106 countries and regions including Europe, America, etc
The design of Euromicron Mould plastic case for electronics has taken into account many factors. These factors include biomechanical comfort (plantar pressure), force distribution, fire resistance ability, and slip resistance.
The design of Euromicron Mould plastic case for electronics relies on different industrial cutting-edge techs. CAD pattern design tech, 2D/3D printing tech, and 3D digital human foot model collection tech have all adopted for the design. Hand-tufted mattress is good enough that could be rolled and compressed in a box
Quality performance tests for Euromicron Mould plastic case for electronics will be finished at the final stage. They include rubbing resistance tests, tensile strength tests, colorfastness, and anti-bacterial tests. Manufactured by strict quality control, each mattress is highly recommended
The assessment of Euromicron Mould plastic case for electronics quality and performance is a mandatory step. The product will be checked for breathability, seam, stitch strength, colorfastness, stretchability, and so on. Each spring is sealed in a strong fiber bag to prevent mould or insects effectively
Strict quality inspection ensures the quality of products. Manufactured by strict quality control, each mattress is highly recommended
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...