Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould by electronic housing customized for andon electronics
Euromicron Mould by electronic housing customized for andon electronics

Euromicron Mould by electronic housing customized for andon electronics
  • Euromicron Mould by electronic housing customized for andon electronics
  • Euromicron Mould by electronic housing customized for andon electronics
  • Euromicron Mould by electronic housing customized for andon electronics

Euromicron Mould by electronic housing customized for andon electronics

Part Name...
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Enterprise Strength
  • Our excellence comes from the efforts of staff from such departments as R&D department, sales department, design department and production department. There are designers, R&D experts, and after-sales personnel in our company.
  • Based on customer's needs, Euromicron fully exerts our own advantages and market potential. We constantly innovate service methods and improve service to meet their expectations for our company.
  • Euromicron always sticks to our tenet of "quality comes first" by focusing on the quality control, service improvement, and fast response.
  • We have been dedicated to the manufacturing of cnc service for about years, and have become the leading enterprise in the industry. This enables us to introduce and operate a complete set of production equipment, and achieve intelligentization and standardization.
  • Since the establishment, our sales network has been continuously expanding to where our sales service is highly appraised by customers at home and abroad. In future, we would like to establish our marketing network overseas and expand the business further.
Company Advantages
1. electronic housing is especially fits for the usage in plastic molding manufacturing .
2. This product stands out for its durability. With a specially coated surface, it is not prone to oxidation with seasonal changes in humidity.
3. Thanks to its fuel efficiency, the product greatly helps companies reduce CO2 emissions during operation and increase greener footprint in the long run.
4. The use of this product can reap major benefits. It relieves workers from the continuing complex, repeated, and labor-intensive tasks.


Part Name:Gateway
Part size:175*136*32mm
Raw Material:ABS+PC
Color:RAL9010,White
Mould Cavity No.:1*1
Injection gate:Hot runner with pin point gate
Surface finished: Mirror Polishing
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:180T
Cycle time:35S
Mold life:300000 shots
Customer:HEKATR@N
Export:Germany


◇◆ Summary for project running
This product used for electrical appliance,the gateway case and grid.Plastic raw material need in inflaming retarding and heat resistant.
Euromicron Mould by electronic housing customized for andon electronics-1

We carried out first trial shot on 40th day,little longer than planed.Since YUDO hot runner system came out of expected date,one week late.Three trial shots for samples production,and finished whole project in 50days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request.
Both parts critical surface need in high polishing,mirror grade,no any marked or scratch allowed.When production,have to take out by robot hand,and cover PE film for protection. Silkscreen also made by EMM factory.

Euromicron Mould by electronic housing customized for andon electronics-2

At first trial shot,case part came out with obvious sink mark and scratch on side surface. The ribs inside are too thick cause sink mark,and no draft angle on side surface cause scratch when mold open.Finally We cut rib material solved sink mark problem.But no draft angle allowed on side surface,we had to add two sliders on both side,to ensure all outside surface look glossy.
The grid part has many small window and only 0.6mm thick.We found flowing mark at each window corner and short shot problem at first trial shot.Then we suggested change high polishing surface to fine texture,VDI3400-33,also change injection gate location,from both side for filling.Customer confirmed and part came out look good.




Company Features
1. Euromicron Mould is the most famous plastic molding manufacturing brand in China.
2. In recent years, we have explored large marketing channels throughout the world. We have established a stable and firm position in America, Asia, and European markets.
3. Euromicron Mould is dedicated to creating the entrepreneurial spirit of supplying high-end solutions. Get more info! Euromicron Mould Engineering Limited shall continuously enhance the core competitiveness of enterprises. Get more info! Euromicron Mould Engineering Limited understands more about your manufacturing requirements. Get more info!
The quality control department must carry out rigorous testing on Euromicron Mould plastic molding manufacturing. These tests typically involve leakage detection, short circuit detection, and electrical load capability testing. This product is skin-friendly and will not cause skin irritations
During the development stage of Euromicron Mould electronic housing, different factors have been taken into consideration. They are mainly structure stability, statics, mechanical properties, the whole efficiency, etc. This product is not easy to shrink
The production of Euromicron Mould plastic molding manufacturing is eco-friendly and does not generate any water, air or noise pollution. And the cleaning process guarantees it is meticulously cleaned and free of dust and odor. Made of quality materials, this product is soft and comfortable to touch
The creation of Euromicron Mould electronic housing is in line with international electrical safety standards. It meets the requirements of IEC, EMC, CE marking, etc. This product shows no loose threads or looped stitches
The following tests must be performed in Euromicron Mould plastic molding manufacturing production. These tests involve dielectric withstand inspection, insulation resistance inspection, leakage current inspection, and the like. It is a great gift for Valentine's Day, Mother's Day, or Birthdays
This product is safe to use. It is tested many times to prevent the use of coatings involving hazardous solvents and hazardous chemicals in its applications. The reinforced stitching makes this product less likely to burst
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...