Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould by electrical molding supplier for electronic components
Euromicron Mould by electrical molding supplier for electronic components

Euromicron Mould by electrical molding supplier for electronic components
  • Euromicron Mould by electrical molding supplier for electronic components
  • Euromicron Mould by electrical molding supplier for electronic components
  • Euromicron Mould by electrical molding supplier for electronic components
  • Euromicron Mould by electrical molding supplier for electronic components

Euromicron Mould by electrical molding supplier for electronic components

With a wide variety of changes in its design, electrical molding has more outstanding characteristics than others. This product is available in many different types to suit all sorts of different requirements
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


Euromicron Mould by electrical molding supplier for electronic components-1
Euromicron Mould by electrical molding supplier for electronic components-2


◇◆ Product parameters


Part Name:socket
Part size:52*52*59mm
Raw Material:ABS
Color:Grey
Mould Cavity No.:1*2
Injection gate:Cold runner with sub gate
Surface finished: VDI3400-33
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:DME or equivalent
Injection machine size:180T
Cycle time:35S
Mold life:100000 shots
Customer:Siemens
Export:Uruguay


◇◆ PRODUCT FEATURES


Euromicron Mould by electrical molding supplier for electronic components-3
Molded part

This socket has two slots on the two opposite sides close to the back wall.No witness marks from side sores or slides are permitted on the outer surface of the box between the upper edge and these openings.On the other had,sink marks are not allowed near the openings on both the side walls and inside of the box,since these areas are visible once the box is installed.

Mold design
The core of the mold,four small side holes are of conventional design.All remaining components are standard or off-the-shelf items.For instance,a standard mold base with dimensions of 200mmX300mm is employed.The mold shut height is 311mm,Plate thickness are also based on standard dimensions.
Steel grade 1.2344,through-hardened 48-52HRC,was employed for the mold cavity and core.An inner core with helical grooves provides cooling for the stationary-side mold plate. Given the art geometry and the requirement that there be no witness lines on the outside surface,the side cores for the round openings must be placed on the stationary side mold plate.
The ejector plate assembly is actuated by the ejector rod,which is connected to the injection machine ejector,All guiding and wear components have been treated with DME standard.



electrical molding is not only functional, but also has colourful and eye-catching styles. Its special lowering valve enables the gentle lowering of the load
Euromicron Mould electrical molding is manufactured with 5S standard production process. Its special lowering valve enables the gentle lowering of the load
Any materials used in the production of Euromicron Mould electrical molding is 100% safe. Its lifting range makes it adaptable to different handling heights
High technical assurance and first-class quality can be seen on electrical molding.
The diligent detective work is performed on the detail of Euromicron Mould electrical molding. This product is maintenance-free due to permanently lubricated connections
The product has a long service life. All of its components or parts are made of high-quality materials which are able to withstand daily heavy use. [卖点、特色句
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...