Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould by electrical molding supplier for andon electronics
Euromicron Mould by electrical molding supplier for andon electronics

Euromicron Mould by electrical molding supplier for andon electronics
  • Euromicron Mould by electrical molding supplier for andon electronics
  • Euromicron Mould by electrical molding supplier for andon electronics
  • Euromicron Mould by electrical molding supplier for andon electronics
  • Euromicron Mould by electrical molding supplier for andon electronics

Euromicron Mould by electrical molding supplier for andon electronics

Euromicron Mould Engineering Limited is one of the major market participants for providing overmolding electronics . We have years of experience in the industry.
Get the latest price
Quantity Needed:
Pieces
E-mail:
Application Scope
The injection mold developed by Euromicron is widely used in various fields.Euromicron insists on providing customers with comprehensive solutions based on their actual needs, so as to help them achieve long-term success.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.
Company Advantages
1. Quality and Design is the guiding principles in Euromicron Mould overmolding electronics production.
2. Experiments indicated that electrical molding with reliable performance and unique designing fashion can overmolding electronics .
3. Euromicron Mould Engineering Limited is a specialized company dedicated to the development and operation of electrical molding .


This connector was supposed to be molded in glass-fiber-reinforced,flame-retardant nylon.
It came with size 35X29.5X26mm,with 40pcs pins in center.High rib,hooks and boss on round side.One four cavity mold should employ a mold base dimension 250*230mm,with 280mm height.Steel grade 1.2767 is used for the mold inserts,while grade 1.2312 is employed for mold plates as well as the ejector plate.Steel grade 1.1730 is mused for remaining plate and rails.Thermal insulating plates,which are available in sizes to match the standard mold plates,serve to insulate the mold from the machine platens.
Euromicron Mould by electrical molding supplier for andon electronics-1
Euromicron Mould by electrical molding supplier for andon electronics-2



◇◆ Mold design


Euromicron Mould by electrical molding supplier for andon electronics-3

This part is simple,but need to ensure 40pcs pin locate properly when plastic filling,specially under high pressure flow.To save production cost,we need to cut down cycle time.So two or three even more over-mold inserts need.Injection machine operator no need to set pin one by one into mold.Just need to set in additional insert before molding.When mold open,just need put whole insert with pin into core.Of course,operator need to take part with insert together.The hooks on both sides are undercut,need design for slider or angle lifter.But no slider split line allow in middle surface.So split line should be set on radius of corner.

The molded part is ejected via knockout pins.In addition to providing for ejection.these pins serve to vent the cavity during filling.It is in part for this reason that the knockout pins are located beneath ribs and other deep section of the part.where entrapped air is to be expected.The mold filling pattern during injection of the molding compound as well as the mechanical and thermal aspects of the mold design were simulated and established during the design phase with the aid of appropriate computer programs.



Company Features
1. Euromicron Mould Engineering Limited is one of the major market participants for providing overmolding electronics . We have years of experience in the industry.
2. First-class equipment, production technology and business management guarantee the first-class quality of Euromicron Mould.
3. Euromicron Mould Engineering Limited hopes to become a leading company providing quality services to customers. Ask! We give our customers a better understanding and confidence in their electrical molding related projects. Ask! By cause of the fundamental principle of being optimistic, Euromicron Mould intends to be a highly effective custom plastic box manufacturer. Ask!
The design of Euromicron Mould overmolding electronics fuses traditional and contemporary elements. It is carried out by designers who have developed an inherent sensitivity towards the materials and classical architectural elements that are condensed in modern decorative arts. This product provides all-day heat on a single charge
The necessary tests for Euromicron Mould custom plastic box have been conducted. These tests include flexibility testing, dimension stability testing, slip resistance testing, and fatigue resistance testing. The heat reflective technology allows it to deliver hours of heat and comfort
The design of Euromicron Mould overmolding electronics is an unrivaled blend of creativity, innovation and market potential. It, carried out by professional designers who deliver a collection of contemporary design furnishing, embraces unconventional color mix ideas and shape design know-how. This product is packaged with a USB charger
The design of Euromicron Mould overmolding electronics is an integration of some necessary elements. They are color matching, texture, lines, pattern silhouette, shape, etc. Its weather repellent coating makes it wind water-resistant
A wide variety of manufacturing processes of Euromicron Mould custom plastic box are as followed: pattern design, fabric sourcing, fabric pre-treatment, grading, layout, cutting, sewing, and ironing. This product is perfect for motorcyclists, snow lovers, travelers, and campers
We adhere to strict quality industry standards and fully guarantee that our products meet international standards. This product is packaged with a USB charger
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...