Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould by electrical molding customized for andon electronics
Euromicron Mould by electrical molding customized for andon electronics

Euromicron Mould by electrical molding customized for andon electronics
  • Euromicron Mould by electrical molding customized for andon electronics
  • Euromicron Mould by electrical molding customized for andon electronics
  • Euromicron Mould by electrical molding customized for andon electronics

Euromicron Mould by electrical molding customized for andon electronics

Part Name...
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Details
With a focus on product quality, Euromicron strives for quality excellence in the production of die casting mold.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods. die casting mold is in line with the stringent quality standards. The price is more favorable than other products in the industry and the cost performance is relatively high.
Company Advantages
1. All of the mechanical components of Euromicron Mould electronic communication equipment are manufactured under sophisticated workmanship. The workmanship includes material preparation, material cleaning, cutting, stamping, spraying, and surface treating.
2. This product has good durability and is suitable for long-term use and storage.
3. The product is of good quality and excellent performance.
4. Placing a hot pan directly on this product, spilling liquids all over it, or the claws of a pet will not have any effect on it.
5. Using this product to reduce greenhouse gas emission is a good way. It greatly contributes to slowing down climate change.


Part Name:Gateway
Part size:175*136*32mm
Raw Material:ABS+PC
Color:RAL9010,White
Mould Cavity No.:1*1
Injection gate:Hot runner with pin point gate
Surface finished: Mirror Polishing
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:180T
Cycle time:35S
Mold life:300000 shots
Customer:HEKATR@N
Export:Germany


◇◆ Summary for project running
This product used for electrical appliance,the gateway case and grid.Plastic raw material need in inflaming retarding and heat resistant.
Euromicron Mould by electrical molding customized for andon electronics-1

We carried out first trial shot on 40th day,little longer than planed.Since YUDO hot runner system came out of expected date,one week late.Three trial shots for samples production,and finished whole project in 50days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request.
Both parts critical surface need in high polishing,mirror grade,no any marked or scratch allowed.When production,have to take out by robot hand,and cover PE film for protection. Silkscreen also made by EMM factory.

Euromicron Mould by electrical molding customized for andon electronics-2

At first trial shot,case part came out with obvious sink mark and scratch on side surface. The ribs inside are too thick cause sink mark,and no draft angle on side surface cause scratch when mold open.Finally We cut rib material solved sink mark problem.But no draft angle allowed on side surface,we had to add two sliders on both side,to ensure all outside surface look glossy.
The grid part has many small window and only 0.6mm thick.We found flowing mark at each window corner and short shot problem at first trial shot.Then we suggested change high polishing surface to fine texture,VDI3400-33,also change injection gate location,from both side for filling.Customer confirmed and part came out look good.




Company Features
1. Euromicron Mould Engineering Limited is a professional production base and backbone enterprise for emerging electrical molding products in the city.
2. Euromicron Mould has made a great success in improving the performance of plastic prototype .
3. We are a firm with a strong corporate philosophy. This philosophy enables us to focus on one thing: to manufacture the best products with high quality. Contact! Pursuing a friendly and harmonious business environment is what we are pursuing. We strive to use marketing techniques that are fair and honest and avoid any advertisement that misleads the customers.
Euromicron Mould plastic prototype is developed to achieve high efficiency. New photodecomposition technology is used to make this product more effective in transforming sunlight into power energy. It has advantages such as control output and strong data storage capabilities
Euromicron Mould electronic communication equipment is developed with the help of advanced solar technology. It adopts the comprehensive technical system which specially caters to the working principle of solar power generation. With sorted menu and operation manner similar to PC, it can be conveniently and simply operated
Euromicron Mould plastic prototype is manufactured by utilizing advanced machines. It is processed by a CNC cutting machine, electrical oven, polishing machine, etc. It has advantages such as control output and strong data storage capabilities
The quality of Euromicron Mould electronic communication equipment can be guaranteed by its hygienic license issued by the Health Supervision Department. Both its physical and chemical filtration systems are in line with the standards required in the pure drinking water. It is granted with over 20 national technical patents
Euromicron Mould electrical molding will be tested once it's finished. It has been sprayed with different kinds of liquid for quality test and it proved that it is not affected by those liquids. Its accuracy and high precision contribute to its low detection limit
This product has a timer that can automatically turn off once the drying is finished, which prevents the food from over drying or scorch. It has obtained CE, SGS, FDA, and other certificates
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...