Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould by car body molding one-stop service supplier for merchant
Euromicron Mould by car body molding one-stop service supplier for merchant

Euromicron Mould by car body molding one-stop service supplier for merchant
  • Euromicron Mould by car body molding one-stop service supplier for merchant
  • Euromicron Mould by car body molding one-stop service supplier for merchant
  • Euromicron Mould by car body molding one-stop service supplier for merchant
  • Euromicron Mould by car body molding one-stop service supplier for merchant

Euromicron Mould by car body molding one-stop service supplier for merchant

Parts of the materials of Euromicron Mould car body molding are purchased directly from suppliers that adhere to the highest environmental and quality standards, ensuring these materials are the most sustainable and healthy available.
Get the latest price
Quantity Needed:
Pieces
E-mail:
Application Scope
die casting mold produced by Euromicron is mostly used in the following aspects.Guided by the actual needs of customers, Euromicron provides comprehensive, perfect and quality solutions based on the benefit of customers.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.
Company Advantages
1. Parts of the materials of Euromicron Mould car body molding are purchased directly from suppliers that adhere to the highest environmental and quality standards, ensuring these materials are the most sustainable and healthy available.
2. This product resists corrosion. It is made from Corten steel, sometimes called “weathering steel”. This is alloyed steel mixed with other metals that react when exposed to air and water. This reaction results in the formation of a layer of oxidization that prevents further corrosion of the metal.
3. Euromicron Mould now has been putting lots of efforts into producing more and better car body molding by paying attention to the development of the market.


This is a door handle of automobile. The product needs electroplating. The finish is high gloss. The material is PC+ABS with electroplating grade.

Euromicron Mould by car body molding one-stop service supplier for merchant-1
Euromicron Mould by car body molding one-stop service supplier for merchant-2


◇◆ Product Features


The mold was built in 2005. It is two-cavity mold. Cold runner system. The part was ejected out by round ejector pin and sleeve ejector. The finish of the cavity is very important. The steel  NAK80 is used in the mold. The polishing grade is A3 (Ra0.032μm). It has high requirements not only for polishing itself but also for surface smoothness, smoothness and geometric accuracy. In order to obtain high-quality polishing effect, the most important thing is to have high-quality polishing tools and accessories such as whetstone, sandpaper and diamond grinding paste. And the choice of polishing process depends on the surface condition after the early processing, such as mechanical processing, edm, grinding and so on.

Euromicron Mould by car body molding one-stop service supplier for merchant-3

Rough polished is the first step in polishing. After milling, edm, grinding and other processes of the surface can be selected in the speed of 35,000 to 40000rpm rotary surface polishing machine or ultrasonic grinding machine for polishing. Commonly used methods include using Φ3 mm in diameter, WA# 400 wheels to remove white edm layer. Then it is grinded by hand, and the strip is added with kerosene as lubricant or coolant. The general order of use is #180~#240~#320~#400~#600~#800~#1000. Semi-polishing is second step. It mainly use sandpaper. The Numbers of sandpaper are: #400~#600~#800~#1000~#1200~#1500. Fine polishing is the final step. Fine polishing mainly USES diamond abrasive paste. The usual grinding order to get diamonds to mix together with polishing wheels is to get 9 microns (#1800) to 6 microns (#3000) to 3 microns (#8000).

Diamond abrasive paste and polishing wheels can be used to remove the hair marks on #1200 and #1500 sandpaper. The carpeting and diamond paste are then polished to the tune of 1 microns to 1/2 microns to 1 microns to 1 quarter microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns. The polishing process to be over 1 microns (including 1 microns) to the accuracy requirements can be carried out in a clean polishing room at the die processing workshop. For more sophisticated polishing an absolutely clean space is required. Dust, smoke, dandruff and saliva can all be discarded after hours of work to obtain a highly precise polished surface.



Company Features
1. Euromicron Mould Engineering Limited is a car body molding market leader at home and abroad.
2. Euromicron Mould Engineering Limited is endeavoring to gain professional proficiency in auto parts mould field.
3. Bearing social responsibility, our company successfully strengthened our relationships with our customers and deepened our connections with our communities. Check now! Green production is what we work hard to achieve. During the production process, we will minimize emissions, controlling wastes, and improving product recycle rates so as to make resources be fully utilized. Quality, innovation, hard work, and enthusiasm are still the guiding forces behind our business. These values make us a company with a strong customer manufacturing center. Check now!
Euromicron Mould auto parts mould will be tested in terms of various aspects. They are fabrics breathability, heat retention property, moisture-absorbing performance, washing resistance, and colorfastness. This product has an incredibly soft hand feel
There are strict performance requirements for Euromicron Mould car body molding. The product has to pass tests in terms of bacteria resistance, slip resistance, abrasion resistance, stretchability, etc. Its loops effectively increase the surface area and enhance its absorbency
Extensive physical performance tests for Euromicron Mould auto parts mould have been carried out. These tests include slip and flex cracking resistance testing, bond adhesion testing, seam & attachment strength testing, and colorfastness testing. The three-dimensional cutting or stereo clipping technique is used to make the soft lines of this product
The designing elements of Euromicron Mould auto parts mould involve a lot. They are style, color harmony, shape, fullness, trims & finishes, as well as body proportion. The chemicals used on this product do not include formaldehyde, chlorine bleach, carcinogenic and allergy-inducing dyes
Euromicron Mould automotive plastic parts will go through strict quality checks. Each panel and the sheet material is labeled with specific QR code for the quality control professionals to track production. This product can withstand frequent wear and tear
The operation of our automotive plastic parts is very simple, even inexperienced worker can learn it in short time. The three-dimensional cutting or stereo clipping technique is used to make the soft lines of this product.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...