Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould buckle automobile de gebrauchtwagen one-stop service supplier for merchant
Euromicron Mould buckle automobile de gebrauchtwagen one-stop service supplier for merchant

Euromicron Mould buckle automobile de gebrauchtwagen one-stop service supplier for merchant
  • Euromicron Mould buckle automobile de gebrauchtwagen one-stop service supplier for merchant
  • Euromicron Mould buckle automobile de gebrauchtwagen one-stop service supplier for merchant

Euromicron Mould buckle automobile de gebrauchtwagen one-stop service supplier for merchant

injection mold components is an original designed automobile de gebrauchtwagen . It does not contain any toxic material and meets the requirements of environmental protection
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. injection mold components is an original designed automobile de gebrauchtwagen . It does not contain any toxic material and meets the requirements of environmental protection
2. This product is needed as it is able to boost accuracy in the workplace. It can reduce the chances of errors. It keeps its appearance as bright and clean as a new one after long-term use
3. The product features a high-gloss finish. Thanks to the RTM process technology which provides smooth on both sides, it has enough attractiveness. The product goes through several inspections before delivery with defects removed
4. The product has excellent plasticity. The thin body construction and high sintering temperature allow it for special and delicate shaping and patterning. The product is easy to assemble and maintain
5. This product is able to withstand numerous times of cleaning and washing. The dye-fixing agent is added into its material to protect the color from fading. With the development of science and technology, the product is upgraded quickly


This trail mold was used to injection Auto door plastic part in different thermoplastics, such as  PC/ABS blend and modified PA, elastomer-modified PC, PC/PBTP blend and modified PBTTB for a number of manufacturing companies.
The two-cavities mold for Auto door plastic part consists essentially of sprue half with the hot runner system and the ejector mold half. Pillars and bushings serve to guide the two mold halves. When the mold is closed. The mold halves are fixed relative to each other via angled surfaces and wear plates.
Gating and temperature control. The molding compound passes through a sprue bushing into the hot runner made of steel (material number 1.2311). From four heated nozzles, also of steel (material number 1.2162), it passes through cold feed channels to the various gates of the mold cavity. The gates measure 15 mm X 1.2 mm.

Euromicron Mould buckle automobile de gebrauchtwagen one-stop service supplier for merchant-1

The hot runner manifold block is heated by cartridge heaters which are pressed against it by laterally bolted cover strips. The distributor lies in a recess of the feed-side mold plate and is pressed by the hot runner covering plate against the nozzles via spacer rings. Guide components prevent the manifold from twisting about the locating device. They also allow the manifold to expand and contract during heating and cooling. The hot runner nozzles are each centered in their locator bores in mold plate by means of three contact surfaces in such a way that they do not experience the expansion and contraction undergone by the manifold. The contact surfaces facing the manifold are convex. Transfer areas for the molding compound are sealed with steel O-rings. The ends of the hot runner nozzles on the mold side have conical bores. In this region. Their exteriors fit snugly into the mold platen to ensure good thermal conduction and thus rapid cooling of the sprue formed therein.

On mold opening, the frozen sprue separates from the hot melt in the manifold at the narrowest point of the conical bore. The nozzles are heated with heating collars. Two temperature probes are attached to each nozzle to monitor and regulate the temperature. The cartridge heaters in the manifold are arranged in seven groups, each of which is individually regulated. The cartridges have an installed rating of about 40 KW.
The melt pressure in the manifold is registered by pressure sennsor P. and that in the cavity, by sensor P. and cann therefore be used for control purposes. The temperature-control system consists of a network of bores in the two mold hales. Heat sensors T measure the temperature in the mold.
Ejection of the Auto door plastic part
When the mold opens, the molded part remains in the moving half. The sprues are also held in place by sprue pullers above the ejector pins. As soon as the stripper plates are pushed forward by the ejector of the machine, the ejector pins push the molded part along with the sprues from the mold core. On mold closing, the ejector plates and thus also the ejector pins are pushed back by ejector-plate return pins. The mold plate is supported by rolls projecting right through the ejector plates to the clamping plate.



Company Features
1. Euromicron Mould Engineering Limited has been serving the Chinese market over the years. We have grown into an expert in the production of injection mold components .
2. We are repleted with excellent technical teams. Well-equipped with expertise and experience, combining with strong research strength, they have successfully finished many product projects.
3. Our company always follows the service tenet of automobile parts manufacturing . Ask online!
The design concept of Euromicron Mould automobile de gebrauchtwagen is comparatively mature in the industry. Expert of 100% Hygienic Pipelines
injection mold components makes injection mold components even more perfect than before. Excellent Mayer, Healthy Life
The raw materials of Euromicron Mould automobile parts manufacturing are eco - friendly and safe. Health Starts From Every Pipe
injection mold components is pretty and colorful. We Control Pipelines, You Control Health
Euromicron Mould injection mold components is crafted from a combination of advanced technology and sophisticated equipment.
In order to comply with international quality standards, this product has passed strict quality inspection procedures. Covered to Connect the World
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...