Euromicron Mould electronic parts is manufactured in complete compliance with the set industry standards using premium quality raw material. Supported by the world-class manufacturing management system, it is of stable quality2.
Its comprehensive cost is much lower than that of common plastic enclosure. Company logo can be printed on the surface of the product 3.
The product is examined under the supervision of our skilled quality experts against various parameters. The product has an output of 50 sets per month4.
Euromicron Mould Engineering Limited is an enterprise which devotes ourselves into manufacturing and designing plastic prototype. It is manufactured to have stable chemical properties5.
Euromicron Mould Engineering Limited has changed their development way to depending on technology creativity on custom plastic box. The product goes through several inspections before delivery with defects removed
◇◆ Product parameters
|Mould Cavity No.:||1*2|
|Injection gate:||Cold runner with sub gate|
|Surface finished: ||VDI3400-33|
|Core &Cavity steel:||1.2344,hardness 48~52HRC|
|Mold component standard:||DME or equivalent|
|Injection machine size:||180T|
|Mold life:||100000 shots|
◇◆ PRODUCT FEATURES
This socket has two slots on the two opposite sides close to the back wall.No witness marks from side sores or slides are permitted on the outer surface of the box between the upper edge and these openings.On the other had,sink marks are not allowed near the openings on both the side walls and inside of the box,since these areas are visible once the box is installed.
Through continuous technological innovation, Euromicron Mould Engineering Limited is in a leading position in the electronic parts industry. 2.
Advanced manufacture technology have been applied for plastic enclosure processing methods in Euromicron Mould Engineering Limited. 3.
It is a never-ending pursuit of Euromicron Mould Engineering Limited to deeply and forwardly meet and nurture customers' external and potential needs. Check now!