Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould belt automobile 24 gebrauchtwagen source now for businessman
Euromicron Mould belt automobile 24 gebrauchtwagen source now for businessman

Euromicron Mould belt automobile 24 gebrauchtwagen source now for businessman
  • Euromicron Mould belt automobile 24 gebrauchtwagen source now for businessman
  • Euromicron Mould belt automobile 24 gebrauchtwagen source now for businessman
  • Euromicron Mould belt automobile 24 gebrauchtwagen source now for businessman
  • Euromicron Mould belt automobile 24 gebrauchtwagen source now for businessman
  • Euromicron Mould belt automobile 24 gebrauchtwagen source now for businessman
  • Euromicron Mould belt automobile 24 gebrauchtwagen source now for businessman
  • Euromicron Mould belt automobile 24 gebrauchtwagen source now for businessman

Euromicron Mould belt automobile 24 gebrauchtwagen source now for businessman

Euromicron Mould automotive plastic parts manufacturers is strictly scrutinized. It has gone through the on-line monitoring for its technological parameter, such as its dyeing saturability, weaving fineness, fabric strength, etc. The product is very easy to maintain
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


Euromicron Mould belt automobile 24 gebrauchtwagen source now for businessman-1
Euromicron Mould belt automobile 24 gebrauchtwagen source now for businessman-2



◇◆ Product Features


Euromicron Mould belt automobile 24 gebrauchtwagen source now for businessman-3

The product is applied in the automobile Mercedes Benz. It is a part of the tank. It works in the high temperature environment. So it is made of the material PA66 with 30% glass fiber. This is a special heat-resistant material. Also it is a high strength engineering material. This composite materials have superiorities in size stability, formability, stretching resistance and impact resistance. This a long product. The length is 495mm. width is 76mm, height is 83mm. it is easy to deflect after injecting. So it is very important to solve deflect issue in the mold.


Euromicron Mould belt automobile 24 gebrauchtwagen source now for businessman-4

The mold is a two-cavities design with hot runner system. The valve gate of the hot runner system is directly on the part. We did mold flow analysis before mold design. Through technical analysis, we can estimate the deformation of the part and find some problems of injection molding. So that we saved some steel for late adjustment about deformation.Meanwhile, we did Some preventive measures for possible problems.

Euromicron Mould belt automobile 24 gebrauchtwagen source now for businessman-5

In this way, we can optimized the mold after trailing shoot until the molding was good. The structure of the part was a lot complex. There were some bosses and hooks at the side of the product. It needed several sliders to formed them. For cooling system, it was very important too. Good cooling system can decrease the deformation of the product and the cycle time. So we designed several sufficient cooling loops for this mold. Not only cooling loops were design in the core insert and cavity insert, but also cooling loops were designed in the sliders and the mold plate.

Euromicron Mould belt automobile 24 gebrauchtwagen source now for businessman-6

In that case, the temperature of the mold can be controlled well. And the product was very stable. The cycle time was about 41 seconds. By controlling the valves of the hot runner system, we can control the volume of each part and the balance of flowing. Because of the plastic material including 30%glass fiber, the steel of forming insert must be harden steel. We choose to use imported steel 1.2344 which hardness was about 52 HRC. The mold ran well. The mold run over 3 hours for testing before delivery to customer. Customer was satisfied the mold.



High-end technologies are used in the production of Euromicron Mould automobile 24 gebrauchtwagen. It is produced under supercritical fluid extraction, plasma, and nano technology which are significant to the textile manufacturing industry. The product works under an effective ERP system
Euromicron Mould [拓展关键词 goes through several production stages: preparation of yarns, twisting of yarns, ginning, fiber washing, scutching, dyeing, carding, etc. The product works very smoothly and causes less noise
Many advanced technologies are adopted in the production of Euromicron Mould automotive plastic parts manufacturers. New technologies in fiber materials, textile dyeing technology, and 3D composite knitting have significantly optimized the overall properties of the product. The product has passed the CE certification
The production procedures of Euromicron Mould automotive plastic parts manufacturers are professional. It is treated with winding, drawing in, looming, shedding, and beating-up processes which comply with the requirements of the textile industry. The product is extremely resistant to corrosion
Euromicron Mould automobile 24 gebrauchtwagen will go through a series of the quality control process. It will go through the inspection in terms of appearance after washing, fastness after washing, fastness to rubbing, the quality of dyestuff, etc. The product requires less training than other same types
Product quality has been recognized by international authoritative testing organizations. The product has the merit of full traceability
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...