Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould automobile automobile de one-stop service supplier for trader
Euromicron Mould automobile automobile de one-stop service supplier for trader

Euromicron Mould automobile automobile de one-stop service supplier for trader
  • Euromicron Mould automobile automobile de one-stop service supplier for trader
  • Euromicron Mould automobile automobile de one-stop service supplier for trader
  • Euromicron Mould automobile automobile de one-stop service supplier for trader
  • Euromicron Mould automobile automobile de one-stop service supplier for trader
  • Euromicron Mould automobile automobile de one-stop service supplier for trader
  • Euromicron Mould automobile automobile de one-stop service supplier for trader
  • Euromicron Mould automobile automobile de one-stop service supplier for trader

Euromicron Mould automobile automobile de one-stop service supplier for trader

The production of Euromicron Mould automotive injection molding companies uses high technology. And the technology we used is constantly updated, the packaging capacity is always guaranteed. Applied in a photovoltaic system, it is absolutely pollution-free
Get the latest price
Quantity Needed:
Pieces
E-mail:


Euromicron Mould automobile automobile de one-stop service supplier for trader-1
Euromicron Mould automobile automobile de one-stop service supplier for trader-2



◇◆ Mold introduce


Euromicron Mould automobile automobile de one-stop service supplier for trader-3

This is a loudspeaker cover, which is used in QianTu car. The material is PC+ABS. The size of the part is 217*206*30mm. There are many small holes and thin ribs on the part. There are two stamps with month and years. The marks are recycle and name of plastic material. And five hooks are used to fix on the frame of loudspeaker. The finish is grain (VDI 3400 ref 30) on viewable surface and polished on the inner surface. No flash、injection gate、ejector mark and fault are allowed on the viewable surface. To produce the part, it need a injection mold with good venting and good finish.

Euromicron Mould automobile automobile de one-stop service supplier for trader-4

A mold with one cavity and hot runner system was built to produce the part. Five angular lifters were designed to form the hooks. The mold was cooled by cooling water. The cycle time was about 39 seconds. The part was ejector out by round ejecting pins. For the mold, the most important was to manufacture the area with small holes and the thin ribs. Core insert can't be milled by CNC and polished because there were too compact small holes and thin ribs.

Euromicron Mould automobile automobile de one-stop service supplier for trader-5

So it needed to make graphite electrode to do EDM. The finish of the surface is 4u-6u Rmax.In this way, the part can demould smoothly without polished. To get good surface of the electorde, it was very import to choice the graphite grade. The graphite must be high strength and fine particles. The size of the particles was about 1-5μm. Too many holes had an effect on flowing of the plastic material when injecting. It was easy to cause venting issue.

Euromicron Mould automobile automobile de one-stop service supplier for trader-6

So it needed a good venting system in the mold. So that some venting inserts were designed in the core side of the mold. To get the viewable surface with EDM texture VDI 3400 ref30, a big copper electrode was made to do EDM. It was a high precision electrode. Also it was done in a good EDM machine. To make lifters moving smoothly, the holes of the lifters were made by slow wire cutting. And a copper guide block was designed for the lifter.



The design of Euromicron Mould automotive injection molding companies involves several stages. They are trend studies, fabric and accessory research, sample making, etc. The product does not require high maintenance
The tests for Euromicron Mould automotive injection molding companies have been conducted. These tests include wiring of main control cabinets, including PLC wiring and operator stations. The product offers outstanding user-friendliness and very good exploitation of the energy available
The production process of Euromicron Mould automotive injection molding companies covers the following stages. They are materials receiving, materials cutting, molding, component fabricating, parts assembling, and finishing. All these processes are conducted by professional technicians with years of experience in upholstery. It is renowned for excellent load adaptability
The manufacture of Euromicron Mould automotive injection molding companies is divided into a few aspects. They are mainly materials preparation, mechanical components' cleaning, cutting, milling, welding, and parts assembly. The product offers ultra-fast transferring performance
Euromicron Mould automobile de has passed a series of security tests. It has been tested the electric strength test, also known as high-voltage insulation test, water-resistant test, and tests for potential overload and statics. With accurate control point, the product has stable performance
The product has stable performance, long storage life and reliable quality. The product offers ultra-fast transferring performance
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...