Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould audi germania automobile renovation solutions for businessman
Euromicron Mould audi germania automobile renovation solutions for businessman

Euromicron Mould audi germania automobile renovation solutions for businessman
  • Euromicron Mould audi germania automobile renovation solutions for businessman
  • Euromicron Mould audi germania automobile renovation solutions for businessman
  • Euromicron Mould audi germania automobile renovation solutions for businessman
  • Euromicron Mould audi germania automobile renovation solutions for businessman
  • Euromicron Mould audi germania automobile renovation solutions for businessman
  • Euromicron Mould audi germania automobile renovation solutions for businessman
  • Euromicron Mould audi germania automobile renovation solutions for businessman

Euromicron Mould audi germania automobile renovation solutions for businessman

Euromicron Mould custom injection molding companies has to be checked for fabric defects that are generally not repairable after production. These defects cover fabric holes, shading among the panel, wrong measurement, foreign yarn, and dye patches. The product is popular for its strong environment adaptability
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


Euromicron Mould audi germania automobile renovation solutions for businessman-1
Euromicron Mould audi germania automobile renovation solutions for businessman-2



◇◆ Product Features


Euromicron Mould audi germania automobile renovation solutions for businessman-3

The product is applied in the automobile Mercedes Benz. It is a part of the tank. It works in the high temperature environment. So it is made of the material PA66 with 30% glass fiber. This is a special heat-resistant material. Also it is a high strength engineering material. This composite materials have superiorities in size stability, formability, stretching resistance and impact resistance. This a long product. The length is 495mm. width is 76mm, height is 83mm. it is easy to deflect after injecting. So it is very important to solve deflect issue in the mold.


Euromicron Mould audi germania automobile renovation solutions for businessman-4

The mold is a two-cavities design with hot runner system. The valve gate of the hot runner system is directly on the part. We did mold flow analysis before mold design. Through technical analysis, we can estimate the deformation of the part and find some problems of injection molding. So that we saved some steel for late adjustment about deformation.Meanwhile, we did Some preventive measures for possible problems.

Euromicron Mould audi germania automobile renovation solutions for businessman-5

In this way, we can optimized the mold after trailing shoot until the molding was good. The structure of the part was a lot complex. There were some bosses and hooks at the side of the product. It needed several sliders to formed them. For cooling system, it was very important too. Good cooling system can decrease the deformation of the product and the cycle time. So we designed several sufficient cooling loops for this mold. Not only cooling loops were design in the core insert and cavity insert, but also cooling loops were designed in the sliders and the mold plate.

Euromicron Mould audi germania automobile renovation solutions for businessman-6

In that case, the temperature of the mold can be controlled well. And the product was very stable. The cycle time was about 41 seconds. By controlling the valves of the hot runner system, we can control the volume of each part and the balance of flowing. Because of the plastic material including 30%glass fiber, the steel of forming insert must be harden steel. We choose to use imported steel 1.2344 which hardness was about 52 HRC. The mold ran well. The mold run over 3 hours for testing before delivery to customer. Customer was satisfied the mold.



Euromicron Mould custom injection molding companies goes through a wide range of fundamental tests. These tests are flammability testing, stain resistance testing, and durability testing, among others. It has been exported to the markets of Thailand, India, Malaysia, etc
Euromicron Mould germania automobile will go through a strict materials composition check. Inspection approaches such as hand feel touch and proper equipment will be adopted to check its ingredients, fiber types, and the safety of ingredients. According to the usage environment, it can be designed with a self-cleaning function
Euromicron Mould germania automobile is recommended only after surviving the stringent tests from third parties. These tests include fabric and apparel construction testing (e.g. seam strength testing) and fiber/chemical analysis (e.g. formaldehyde content testing). It promotes a high chemical reaction speed
The design of Euromicron Mould custom injection molding companies is human-oriented. It takes various factors into consideration, including the functionality and practicality that bring to people's life, convenience, and safety level. Its display screen is equipped with a long-live monochrome light source
Lab testing will be performed to control the quality of Euromicron Mould germania automobile. The overall fabric quality, the safety of fabrics, the quality of accessories if any, and quality of dye agents will be sent to an accredited laboratory for assessment. With an IP65-rating shell, the product is dustproof and suitable for outdoor operation
The design of the product is eye-catching. It aims to let the packaged items being noticed by the customers. The product enjoys high resistance to vibration
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...