Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  > 

AI - Page Sitemap

 > 

Euromicron Mould andon plastic prototype wholesale for electronic components

Euromicron Mould andon plastic prototype wholesale for electronic components

Euromicron Mould andon plastic prototype wholesale for electronic components

Part Name
Electronic connector
Part size
18*15*3mm
Raw Material
NYLON+30%GF
Color
RAL9005,Black
Mould Cavity No
16+16
Injection gate
Cold runner
Surface finished
Polishing #600
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Application Scope
Euromicron's injection mold can be used in multiple industries and fields.Euromicron is rich in industrial experience and is sensitive about customers' needs. We can provide comprehensive and one-stop solutions based on customers' actual situations.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.
Product Comparison
Closely following the market trend, Euromicron uses advanced production equipment and manufacturing technology to produce die casting mold. The product receives favors from the majority of customers for the high quality and favorable price.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Compared with same kind of products in the industry, die casting mold has the following highlights due to the better technical capability.
Company Advantages
1. Euromicron Mould plastic prototype comes in a wide range of practical and creative designs.
2. plastic prototype  has the features of plastic enclosure for electronic products . Measurements show that it is plastic enclosures for electronics .
3. plastic enclosure for electronic products reflects the high quality of plastic prototype .
4. The product is more competitive in the commercial market and has a broad market prospect.
5. The product is widely praised by users for its good characteristics and has high market application potential.


Part Name:Electronic connector
Part size:18*15*3mm
Raw Material:NYLON+30%GF
Color:RAL9005,Black
Mould Cavity No.:16+16
Injection gate:Cold runner 
Surface finished: Polishing #600
Core &Cavity steel:1.2344, hardness 48~52HRC
Mold component standard:DME or equivalent
Injection machine size:120T
Cycle time:18S
Mold life:300000 shots
Customer:AEC
Export:USA


◇◆ Summary for project running
This product used for electrical connector. And was supposed to be molded in glass-fiber-reinforced, flame-retardant nylon.
Euromicron Mould andon plastic prototype wholesale for electronic components-1

There are many small pin holes on part. Hole’s diameter is 0.6mm with 2.2mm distance of each. Dimension tolerance should be within +/-0.01mm.   Mold design-We will make this mold with 2+2cavity, cold runner in to banana gate. To make parts leave on core side, parting line should be on top. And all pin holes location need to be inserted. Because the hole diameter and distance need to keep in strict tolerance. Separated insert make it easy to replace. Need to pay high attention to electrode making and EDM process. We made whole electrode include all pin holes position, then checked by CMM machine, until shown it was made in proper dimension, took to Mirror EDM manufacture.

Euromicron Mould andon plastic prototype wholesale for electronic components-2

Injection-Any mismatch or flash in switch(female half) hole would cause male half pin bend, so this request holding pressure not too high. but also guarantee not cause sink mark on outside surface. Although the part and mold is small, enough cooling line still necessary. Because the part quantity in demand is one million each month, we need to cut down cycle time as much as possible. So that we can save production cost.




Company Features
1. Serving as a reliable brand, Euromicron Mould's business scope mainly covers plastic enclosure for electronic products .
2. We have the most advanced production equipment and advanced technical equipment. They allow the company to produce every piece accurately and consistently.
3. Our mission is to build long-term cooperative relationships with our customers by providing them exceptional customer services, innovative products, and advanced technology. Call now! As a major employer, we recognize that we have a duty to contribute to the wider economy, creating jobs, using local suppliers and supporting our clients in tackling local socio-economic issues. Call now! Our company is based on values. These values ​​include working hard, building relationships and providing quality service to clients. These values ​​ensure that the manufactured product portrays the image of the client company. Call now! Euromicron Mould Engineering Limited firmly believes that quality is above everything else. Call now!
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...