Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould analyzer health medical care manufacturer for merchant
Euromicron Mould analyzer health medical care manufacturer for merchant

Euromicron Mould analyzer health medical care manufacturer for merchant
  • Euromicron Mould analyzer health medical care manufacturer for merchant
  • Euromicron Mould analyzer health medical care manufacturer for merchant
  • Euromicron Mould analyzer health medical care manufacturer for merchant

Euromicron Mould analyzer health medical care manufacturer for merchant

Euromicron Mould health medical care meets the requirements of a series of standards. These standards include IEC 60038 (IEC standard voltages), IEC 60076 (Power transformers - ability to withstand short-circuit), etc. The product has the advantages of heavy tension and impact resistance
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


Product Name:monitoring shell 
Product size:607*559*461mm 
Part visible surface:Texturing
Product material:PC+ABS
Shrinkage rate %:0.6
Cavity quantity:1*1
Injection machine type:500T
Cycle time:45S
Product Take out way:Manipulator/Cupula
Cooling system:cold runner
Cavity and core steel:718H
Mold base standard:HASCO
Terminal Customer:Siemens 
Export:Germany


◇◆ Product Features
Euromicron Mould analyzer health medical care manufacturer for merchant-1

In this set of products, the surface shell mold can adopt large nozzle mold or hot nozzle to cool the flow channel mold, which can not only meet customer requirements but also reduce the cost of the mold;
Among them, the way of glue injection is diving, but the glue inlet is different from the common conical shape but similar to duck mouth shape, which can reduce the pressure of glue injection and prevent shrinkage lines.
This product made in ABS+PC material, which can improve the heat resistance, impact resistance and tensile properties of ABS and enable ABS to be used in high-end fields.
On the other hand, it can reduce the melt viscosity of PC, improve the fluidity of PC, improve its processing performance, reduce the internal stress of products, reduce the sensitivity of impact strength to gap and thickness, so that PC can be used for the manufacture of thin-wall long process products.

Euromicron Mould analyzer health medical care manufacturer for merchant-2

Since the front mold of this product has bone position and screw column, in order to prevent adhesion of the front mold, the slider can be used in the middle part of the product to force the rear mold.
In the aspect of medical product assembly, it is best to be supplemented by hot-melt method, or adopt the method of fastening seal and front shell as a whole to strengthen the degree and increase the tightness. All external interfaces shall be protected and sealed by rubber protective cover to prevent internal pollution of the product.




Euromicron Mould health medical care meets mandatory electrical safety requirements. It has to pass the following tests: high voltage test, leakage current test, insulation resistance test, and ground continuity test. The product is sealed and welded exquisitely
Euromicron Mould china plastic injection molding is an outcome of four applicable expertise. Specific knowledge in geology, chemical analysis, and high purity process are used to convert raw materials into high purity and high-value final product. The heavy-duty materials with precision engineering can ensure its durability for long service time
Euromicron Mould health medical care is sophisticatedly designed. Our architects and engineers consider many issues when working with the design, including environmental issues, aesthetic appearance, occupant comfort, and view. The heavy-duty materials with precision engineering can ensure its durability for long service time
The whole production procedures of Euromicron Mould health medical care are in line with hardware manufacture standards both domestically and internationally, including the stamping and welding processes. Made of strong materials, it is high-strength
Euromicron Mould health medical care is produced in line with the strict specifications for phone models required by customers. From its materials selection to the size inspection stage, it will be tested by our QC team. It is less likely to leave dents on the product
This product has good strength. Any suddenly applied or impact load which may cause failure has been taken into consideration in the design phase. It is exported to over 30 countries and regions in the world
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...