Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  electronics electronic housing by for andon electronics Euromicron Mould
electronics electronic housing by for andon electronics Euromicron Mould

electronics electronic housing by for andon electronics Euromicron Mould
  • electronics electronic housing by for andon electronics Euromicron Mould
  • electronics electronic housing by for andon electronics Euromicron Mould
  • electronics electronic housing by for andon electronics Euromicron Mould

electronics electronic housing by for andon electronics Euromicron Mould

Durability: It has been given a relatively long lifespan and can retain somewhat functionality and aesthetics after long-time application.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
Euromicron insists on the use of high-quality materials and advanced technology to manufacture injection mold. Besides, we strictly monitor and control the quality and cost in each production process. All this guarantees the product to have high quality and favorable price.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Euromicron's injection mold is produced in strict accordance with standards. We make ensure that the products have more advantages over similar products in the following aspects.
  • v s
Enterprise Strength
  • Our excellence comes from the efforts of staff from such departments as R&D department, sales department, design department and production department. There are designers, R&D experts, and after-sales personnel in our company.
  • Euromicron is able to provide comprehensive and efficient services and solve customers' problems depending on a professional service team.
  • Euromicron always sticks to our tenet of "quality comes first" by focusing on the quality control, service improvement, and fast response.
  • We have been dedicated to the manufacturing of cnc service for about years, and have become the leading enterprise in the industry. This enables us to introduce and operate a complete set of production equipment, and achieve intelligentization and standardization.
  • Since the establishment, our sales network has been continuously expanding to where our sales service is highly appraised by customers at home and abroad. In future, we would like to establish our marketing network overseas and expand the business further.
Company Advantages
1. Euromicron Mould custom plastic cases for electronics has been paid 100% attention from the internal structure to the appearance.
2. Internationally-certified quality: The product, tested by the authoritative third-party, has been approved to meet with the widely-recognized international quality standards.
3. Durability: It has been given a relatively long lifespan and can retain somewhat functionality and aesthetics after long-time application.
4. The use of this product means saving time and labor costs. Thanks to its high efficiency, it can quickly finish tasks that people can not do.
5. Thanks to its easy operation and maintenance during its service life, this product can greatly help reduce operation costs.


Part Name:Electronic connector
Part size:18*15*3mm
Raw Material:NYLON+30%GF
Color:RAL9005,Black
Mould Cavity No.:16+16
Injection gate:Cold runner 
Surface finished: Polishing #600
Core &Cavity steel:1.2344, hardness 48~52HRC
Mold component standard:DME or equivalent
Injection machine size:120T
Cycle time:18S
Mold life:300000 shots
Customer:AEC
Export:USA


◇◆ Summary for project running
This product used for electrical connector. And was supposed to be molded in glass-fiber-reinforced, flame-retardant nylon.
electronics electronic housing by for andon electronics Euromicron Mould-1

There are many small pin holes on part. Hole’s diameter is 0.6mm with 2.2mm distance of each. Dimension tolerance should be within +/-0.01mm.   Mold design-We will make this mold with 2+2cavity, cold runner in to banana gate. To make parts leave on core side, parting line should be on top. And all pin holes location need to be inserted. Because the hole diameter and distance need to keep in strict tolerance. Separated insert make it easy to replace. Need to pay high attention to electrode making and EDM process. We made whole electrode include all pin holes position, then checked by CMM machine, until shown it was made in proper dimension, took to Mirror EDM manufacture.

electronics electronic housing by for andon electronics Euromicron Mould-2

Injection-Any mismatch or flash in switch(female half) hole would cause male half pin bend, so this request holding pressure not too high. but also guarantee not cause sink mark on outside surface. Although the part and mold is small, enough cooling line still necessary. Because the part quantity in demand is one million each month, we need to cut down cycle time as much as possible. So that we can save production cost.




Company Features
1. Euromicron Mould Engineering Limited is a leading company in the industry of electronic housing in China.
2. The factory has its own strict production management system. With extensive procurement resources, the factory can effectively control procurement and production costs, which eventually benefits clients.
3. Euromicron Mould Engineering Limited will always offer customers high quality and perfect customer service. Get info! Euromicron Mould will keep supplying the maximum professional support for clients. Get info! Being the leader of the custom plastic cases for electronics industry is the goal of electronic parts . Get info! The culture positioning of Euromicron Mould brand is to make each staff to serve customers with their professional skills. Get info!
Euromicron Mould custom plastic cases for electronics will go through strict safety testing. It will be tested with regards to its electrical heating elements, creepage distance, and electric clearance. This product provides both durability and functionality
Euromicron Mould electronic housing conform to a variety of security standards for the electric appliance. Its water-proof, anti-vibration, moisture-resistant, and impact-resistant performance all meet relevant requirements. This product is available in various sizes
Before production, the materials and components of Euromicron Mould custom plastic cases for electronics have to go through inspections. They must be verified by the QC team to ensure its maximum electrical safety. Antimicrobial finishes have been introduced for this product
Euromicron Mould electronic parts has gone through rigorous security standards. It has been certified under China's CCC and CEMC, Canada's CSA, America's UL, and Japan's S-MARK and VCCI. It gives the interior home decoration a defined aesthetic characteristic
We have carried out a number of assessment tests on Euromicron Mould electronic parts. They involve energy efficiency, energy consumption, insulation performance, leakage and other aspects of testing. This product is suitable for both spring and summer
The product generates an only little amount of electromagnetic radiation. It has been tested to prove that it has a very low electromagnetic wave which has limited influence. This product has been exported to more than 50 countries
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...