Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  electronicmmunication plastic prototype supplier for andon electronics
electronicmmunication plastic prototype supplier for andon electronics

electronicmmunication plastic prototype supplier for andon electronics
  • electronicmmunication plastic prototype supplier for andon electronics
  • electronicmmunication plastic prototype supplier for andon electronics
  • electronicmmunication plastic prototype supplier for andon electronics
  • electronicmmunication plastic prototype supplier for andon electronics

electronicmmunication plastic prototype supplier for andon electronics

This connector was...
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Details
Euromicron adheres to the principle of 'details determine success or failure' and pays great attention to the details of injection mold.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Under the guidance of market, Euromicron constantly strives for innovation. injection mold has reliable quality, stable performance, good design, and great practicality.
Enterprise Strength
  • Our excellence comes from the efforts of staff from such departments as R&D department, sales department, design department and production department. There are designers, R&D experts, and after-sales personnel in our company.
  • Euromicron actively adopts the suggestions of customers and strives to provide quality and comprehensive services for customers.
  • Euromicron always sticks to our tenet of "quality comes first" by focusing on the quality control, service improvement, and fast response.
  • We have been dedicated to the manufacturing of cnc service for about years, and have become the leading enterprise in the industry. This enables us to introduce and operate a complete set of production equipment, and achieve intelligentization and standardization.
  • Since the establishment, our sales network has been continuously expanding to where our sales service is highly appraised by customers at home and abroad. In future, we would like to establish our marketing network overseas and expand the business further.
Company Advantages
1. Euromicron Mould plastic prototype has passed the following tests that are conducted by the third-party organization: lifecycle testing, biocompatibility testing, durability testing, and chemical resistance testing.
2. Strict quality control of this product is an indispensable step during its production.
3. Many customers have remarked that the product is absolutely perfect in its quality, performance, usability, etc.
4. To guarantee products quality, Euromicron Mould Engineering Limited uses advanced testing equipment.
5. The high performance of plastic prototype effectively enhance the popularity and reputation of Euromicron Mould Engineering Limited.


This connector was supposed to be molded in glass-fiber-reinforced,flame-retardant nylon.
It came with size 35X29.5X26mm,with 40pcs pins in center.High rib,hooks and boss on round side.One four cavity mold should employ a mold base dimension 250*230mm,with 280mm height.Steel grade 1.2767 is used for the mold inserts,while grade 1.2312 is employed for mold plates as well as the ejector plate.Steel grade 1.1730 is mused for remaining plate and rails.Thermal insulating plates,which are available in sizes to match the standard mold plates,serve to insulate the mold from the machine platens.
electronicmmunication plastic prototype supplier for andon electronics-1
electronicmmunication plastic prototype supplier for andon electronics-2



◇◆ Mold design


electronicmmunication plastic prototype supplier for andon electronics-3

This part is simple,but need to ensure 40pcs pin locate properly when plastic filling,specially under high pressure flow.To save production cost,we need to cut down cycle time.So two or three even more over-mold inserts need.Injection machine operator no need to set pin one by one into mold.Just need to set in additional insert before molding.When mold open,just need put whole insert with pin into core.Of course,operator need to take part with insert together.The hooks on both sides are undercut,need design for slider or angle lifter.But no slider split line allow in middle surface.So split line should be set on radius of corner.

The molded part is ejected via knockout pins.In addition to providing for ejection.these pins serve to vent the cavity during filling.It is in part for this reason that the knockout pins are located beneath ribs and other deep section of the part.where entrapped air is to be expected.The mold filling pattern during injection of the molding compound as well as the mechanical and thermal aspects of the mold design were simulated and established during the design phase with the aid of appropriate computer programs.



Company Features
1. Euromicron Mould Engineering Limited has developed into an international leader in the field of plastic prototype .
2. We house a series of manufacturing facilities, including engineering, manufacturing, and testing machines. These machines guarantee an efficient and time-saving method of manufacturing to meet customer requirement in short lead-time.
3. Euromicron Mould Engineering Limited aims to become a leader in the electronica injection moulding industry. Get an offer! Euromicron Mould Engineering Limited is committed to bringing the best to other producers electronic parts . Get an offer!
In the design phase of Euromicron Mould electronic parts, the following steps are generally followed: the determination of forces acting on and energy transmitted by each element; selection of materials; confirmation of size and shape, etc. The use of this product can ensure safe driving to some extent
Euromicron Mould electronica injection moulding is designed with a range of operation types, These types include automatic operation, continuous operation, synchronous operation, modular operation, etc. The product is produced with high precision in size and shape
The design of Euromicron Mould plastic prototype follows the many basic principles. They are mainly mechanical properties, static and dynamic structure, safety, cycle time and so on. Featuring super light weight, it enhances the fuel economy of a vehicle
The evaluation for Euromicron Mould plastic prototype has been strictly conducted. It mainly includes finite element stress analysis of all components, fatigue analysis, load increase analysis, etc. It works stably even under high temperature
Euromicron Mould electronic parts has been tested for many times. These tests have been conducted in terms of power, efficiency, service life, strength, stiffness, anti-friction, wear and tear, vibration stability, etc. The use of this product can ensure safe driving to some extent
electronica injection moulding finds a broad range of applications due to its versatility, product properties and economics. The product is characterized by good vibration resistance
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...