custom plastic box | Electrommunication

Enterprise Strength

Our excellence comes from the efforts of staff from such departments as R&D department, sales department, design department and production department. There are designers, R&D experts, and after-sales personnel in our company.
Euromicron is equipped with a comprehensive service system. We wholeheartedly provide you with quality products and thoughtful services.
Euromicron always sticks to our tenet of "quality comes first" by focusing on the quality control, service improvement, and fast response.
We have been dedicated to the manufacturing of cnc service for about years, and have become the leading enterprise in the industry. This enables us to introduce and operate a complete set of production equipment, and achieve intelligentization and standardization.
Since the establishment, our sales network has been continuously expanding to where our sales service is highly appraised by customers at home and abroad. In future, we would like to establish our marketing network overseas and expand the business further.

Product Comparison

die casting mold has the following advantages: well-chosen materials, reasonable design, stable performance, excellent quality, and affordable price. Such a product is up to the market demand.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Compared with other products in the same industry, Euromicron's die casting mold has the following characteristics.

Company Advantages
1. The design of Euromicron Mould plastic housing for electronics is of professionalism. It is carried out considering many factors such as mechanical structure, spindles, control system, and part tolerances.
2. The product features excellent noise reduction performance. When sound waves travel through the panels, its fiberglass fibers or foam pores will vibrate and increase friction.
3. The product has reliable circuit board performance. There is no crosstalk problem in the circuit board and all the internal wirings are reasonably arranged.
4. This product is the basis for good sleep. One can use it to give the bed a furry, seductive look and feel.
5. The product serves as a useful method to help increase operators' efficiency. It is effective in cutting operation times while increasing manufacturing productivity.

Part Name:	Gateway
Part size:	17513632mm
Raw Material:	ABS+PC
Color:	RAL9010,White
Mould Cavity No.:	1*1
Injection gate:	Hot runner with pin point gate
Surface finished:	Mirror Polishing
Core &Cavity steel:	1.2344,hardness 48~52HRC
Mold component standard:	HASCO or equivalent
Injection machine size:	180T
Cycle time:	35S
Mold life:	300000 shots
Customer:	HEKATR@N
Export:	Germany

◇◆ Summary for project running

This product used for electrical appliance,the gateway case and grid.Plastic raw material need in inflaming retarding and heat resistant.

electronicmmunication plastic housing for electronics customized for andon electronics Euromicron Mould-1

We carried out first trial shot on 40th day,little longer than planed.Since YUDO hot runner system came out of expected date,one week late.Three trial shots for samples production,and finished whole project in 50days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request.
Both parts critical surface need in high polishing,mirror grade,no any marked or scratch allowed.When production,have to take out by robot hand,and cover PE film for protection. Silkscreen also made by EMM factory.

electronicmmunication plastic housing for electronics customized for andon electronics Euromicron Mould-2

At first trial shot,case part came out with obvious sink mark and scratch on side surface. The ribs inside are too thick cause sink mark,and no draft angle on side surface cause scratch when mold open.Finally We cut rib material solved sink mark problem.But no draft angle allowed on side surface,we had to add two sliders on both side,to ensure all outside surface look glossy.
The grid part has many small window and only 0.6mm thick.We found flowing mark at each window corner and short shot problem at first trial shot.Then we suggested change high polishing surface to fine texture,VDI3400-33,also change injection gate location,from both side for filling.Customer confirmed and part came out look good.

Company Features
1. Euromicron Mould Engineering Limited is a well-respected company with years of manufacturing experience. We offer a diverse range of high-quality products such as plastic housing for electronics .
2. Euromicron Mould Engineering Limited adopts the most advanced technology to deal with the changeable market.
3. With a strong sense of responsibility, Euromicron Mould now has been following the rules to serve customers well. Welcome to visit our factory! Euromicron Mould brand now abides by improving the quality of the service. Welcome to visit our factory!

s******z

The production of custom plastic box always takes custom plastic box into account. It doesn't shrink at low temperatures or high temperatures easily

h******y

Our custom plastic box are constantly updated to follow the trend. It is widely used for its great load bearing capacity

b******v

plastic housing for electronics produced by Euromicron Mould Engineering Limited are mainly characterized by their plastic housing for electronics. It is available in different colors

e******q

The material of custom plastic box allows custom plastic box to make itself custom plastic box. Its electrical insulation performance makes it stand out in the market

m******r

The special composition of plastic housing for electronics makes it obtain good performance of plastic housing for electronics. Made of high-quality materials, it has a high elastic modulus

w******t

Our plastic housing for electronics not only has excellent quality, but also has an affordable price, and the overall cost performance is relatively high.

Product Message

*Name

Phone

*E-mail

*Content

CONTACT US

China headquarters:
EMAIL: kenny.he@euromicronmould.com
TEL : (+86) 0755-29441759

FAX : 0755-29190865
Office Add : No. 1408, DreamLand Times Building, HePing East Rd, LongHua County, ShenZhen, GuangDong, China 518109.

Factory 1 : No.2 FuRong 3 Road ShaJing Bao’an District,ShenZhen,China 518104.

Factory 2: Building 12, No.2 Xingye Road, Songshan Lake Park, Dongguan, Guangdong, China 523000

SKYPE : hezhenghualik

Germany office: Max-Planck-Str. 2 Geb.F4
D-21502 Geesthacht Schleswig-Holstein Germany

Contact: Dominic Zhou

Tell: +49 04152 889188

Email: de@euromicromould.com

CONTACT PERSON

Marketing :

info@euromicronmould.com

General Manager :

kenny.he@euromicronmould.com

Manufacturing Director :

Michael@euromicronmould.com

Sitemap

electronicmmunication plastic housing for electronics customized for andon electronics Euromicron Mould