Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Electronic products by injection molding for Siemens
Electronic products by  injection molding for Siemens

Electronic products by  injection molding for Siemens
  • Electronic products by  injection molding for Siemens
  • Electronic products by  injection molding for Siemens
  • Electronic products by  injection molding for Siemens
  • Electronic products by  injection molding for Siemens

Electronic products by injection molding for Siemens

Euromicron Mould Engineering Limited is great at producing garnished plastic enclosure box with high performance. With excellent technical strength, Euromicron Mould Engineering Limited is deeply trusted by customers.
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. Euromicron Mould plastic molding manufacturing is designed and developed in accordance with industry norms and standards. The product has an output of 50 sets per month
2. From the market trend, this product has very good market prospects. The complete after-sales service system is rendered for the product to maximize customer value
3. This product is easy and safe to install. During the assembly stage, all its electric parts are finely housed inside to prevent any potential contact danger. The product is capable of withstanding high torque
4. The product plays an important role in dissipating the heat generated from the device by air cooling, fluid cooling, or other cooling mediums. The product is highly evaluated by many famous enterprises, such as Ford, Volkswagen, Toyota, and Honda


Electronic products by  injection molding for Siemens-1
Electronic products by  injection molding for Siemens-2


◇◆ Product parameters


Part Name:socket
Part size:52*52*59mm
Raw Material:ABS
Color:Grey
Mould Cavity No.:1*2
Injection gate:Cold runner with sub gate
Surface finished: VDI3400-33
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:DME or equivalent
Injection machine size:180T
Cycle time:35S
Mold life:100000 shots
Customer:Siemens
Export:Uruguay


◇◆ PRODUCT FEATURES


Electronic products by  injection molding for Siemens-3
Molded part

This socket has two slots on the two opposite sides close to the back wall.No witness marks from side sores or slides are permitted on the outer surface of the box between the upper edge and these openings.On the other had,sink marks are not allowed near the openings on both the side walls and inside of the box,since these areas are visible once the box is installed.

Mold design
The core of the mold,four small side holes are of conventional design.All remaining components are standard or off-the-shelf items.For instance,a standard mold base with dimensions of 200mmX300mm is employed.The mold shut height is 311mm,Plate thickness are also based on standard dimensions.
Steel grade 1.2344,through-hardened 48-52HRC,was employed for the mold cavity and core.An inner core with helical grooves provides cooling for the stationary-side mold plate. Given the art geometry and the requirement that there be no witness lines on the outside surface,the side cores for the round openings must be placed on the stationary side mold plate.
The ejector plate assembly is actuated by the ejector rod,which is connected to the injection machine ejector,All guiding and wear components have been treated with DME standard.



Company Features
1. Euromicron Mould Engineering Limited is great at producing garnished plastic enclosure box with high performance. With excellent technical strength, Euromicron Mould Engineering Limited is deeply trusted by customers.
2. By applying core technologies, Euromicron Mould has achieved great success in solving problems in the manufacturing process.
3. We have formed into business relationships with customers from all over the world. Our main market is Asia, America, and Europe with high satisfaction among our customers. The service philosophy of plastic molding manufacturing in Euromicron Mould Engineering Limited emphasize on custom plastic cases for electronics . Welcome to visit our factory!
Euromicron Mould plastic molding manufacturing is manufactured at a high-quality level. It meets the standards stipulated in the National Basic Safety Technical Specifications for Garments Products. The product is customizable upon various customers' specifications
The fabrics used in Euromicron Mould custom plastic cases for electronics comply with industrial standards. Their quality meets the regulations stipulated in FZ/T 01053 and GB/T 29862. Side panels and doors are constructed of heavy cold rolled steel to prevent impact damage
The manufacture of Euromicron Mould plastic enclosure box complies with some basic garment standards. These standards are GB Standards, European Standards, AATCC, ASTM, and ISO. The product complies with IEC, ETSI, and DIN41494 standards
Euromicron Mould plastic enclosure box is manufactured under strict control. It will be rigorously scrutinized ranging from the materials feeding, CNC cutting, polishing, to installation in order to meet the highest professional ambry standards. The product complies with IEC, ETSI, and DIN41494 standards
Euromicron Mould plastic enclosure box has passed a broad range of testing conducted by third-party testing labs. The testing mainly covers appearance after dry cleaning or washing, crease resistance/recovery, dimensional stability to washing, and flammability. The product can keep the cables running smoothly without interruption
This product is an absolute necessity in any store or exhibition. It works well with a variety of products including perfumes, electronics, watches, and jewelry. The product can be designed wall mounting or standing type
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...