Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Electronic connector product for Andon Electronics Corporation
Electronic connector product for Andon Electronics Corporation

Electronic connector product for Andon Electronics Corporation
  • Electronic connector product for Andon Electronics Corporation
  • Electronic connector product for Andon Electronics Corporation
  • Electronic connector product for Andon Electronics Corporation

Electronic connector product for Andon Electronics Corporation

Euromicron Mould custom plastic enclosures electronics has passed the following physical and mechanical tests including strength test, fatigue test, hardness test, bending test, and rigidity test. Vacuum packing method is adopted for the product to avoid mold rusting during transportation
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. Euromicron Mould custom plastic enclosures electronics has passed the following physical and mechanical tests including strength test, fatigue test, hardness test, bending test, and rigidity test. Vacuum packing method is adopted for the product to avoid mold rusting during transportation
2. The product is widely used to improve the appearance, enhance one's confidence and finally help people get many compliments from others. Its quality has been certified under ISO14001:2004 and CE
3. The adoption of custom plastic enclosures electronics improve the produce process and endow communication processor with injection moldable plastics . The product is capable of withstanding high torque


Part Name:Electronic connector
Part size:18*15*3mm
Raw Material:NYLON+30%GF
Color:RAL9005,Black
Mould Cavity No.:16+16
Injection gate:Cold runner 
Surface finished: Polishing #600
Core &Cavity steel:1.2344, hardness 48~52HRC
Mold component standard:DME or equivalent
Injection machine size:120T
Cycle time:18S
Mold life:300000 shots
Customer:AEC
Export:USA


◇◆ Summary for project running
This product used for electrical connector. And was supposed to be molded in glass-fiber-reinforced, flame-retardant nylon.
Electronic connector product for Andon Electronics Corporation-1

There are many small pin holes on part. Hole’s diameter is 0.6mm with 2.2mm distance of each. Dimension tolerance should be within +/-0.01mm.   Mold design-We will make this mold with 2+2cavity, cold runner in to banana gate. To make parts leave on core side, parting line should be on top. And all pin holes location need to be inserted. Because the hole diameter and distance need to keep in strict tolerance. Separated insert make it easy to replace. Need to pay high attention to electrode making and EDM process. We made whole electrode include all pin holes position, then checked by CMM machine, until shown it was made in proper dimension, took to Mirror EDM manufacture.

Electronic connector product for Andon Electronics Corporation-2

Injection-Any mismatch or flash in switch(female half) hole would cause male half pin bend, so this request holding pressure not too high. but also guarantee not cause sink mark on outside surface. Although the part and mold is small, enough cooling line still necessary. Because the part quantity in demand is one million each month, we need to cut down cycle time as much as possible. So that we can save production cost.




Company Features
1. With complete supply chain equipped, Euromicron Mould has made a lot of achievements in communication processor industry. Our factory is situated in where the raw material is available easily. Due to the convenience, profit maximization may be obtained. This will also help save the time and cost of transportation.
2. Our factory runs with a strict supply chain management system. This system guarantees the day-to-day flow of goods and raw materials, which in return helps the factory regulate and coordinate production plans.
3. Euromicron Mould Engineering Limited has professionals with extensive experience and good industry skills. During our production, we always keep costs and environmental considerations in mind. We make efforts to minimize energy consumption and waste, meeting the standards of environmental standards.
Euromicron Mould injection moldable plastics is manufactured by our experts utilizing optimum quality raw materials with the help of advanced technology. Its payment system supports coin, paper money, mobile wallet, IC card, QR code, Apple pay, Samsung pay, Quick Pass, etc
Euromicron Mould communication processor uses the high-grade basic materials in complete compliance with industry standards. It is widely used in campus, subway, airport, shopping malls, hospitals, hotels, etc
The raw material used in Euromicron Mould communication processor is of high quality and has no any strange smell during use. Featuring power-off protection, it can restore the data after the restart
The production process of Euromicron Mould communication processor has been standardized by using the advanced technology. It has high resistance from breakage and flame
All of our Euromicron Mould injection moldable plastics comply with the latest industry standards. It is explosion-, dust-, and water- resistant
The results indicate that injection moldable plastics enable custom plastic enclosures electronics function with relatively high stability and long life. It offers effective protection for merchandise against weather conditions
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...