Euromicron Mould Engineering Limited was found in 1995

Home  >  Customized Application  >  Electrommunication For sell  > 

Electronic connector product by precision injection molding

Electronic connector product by precision injection molding

Electronic connector product by precision injection molding
  • Electronic connector product by precision injection molding
  • Electronic connector product by precision injection molding
  • Electronic connector product by precision injection molding
  • Electronic connector product by precision injection molding
  • Electronic connector product by precision injection molding

Electronic connector product by precision injection molding

Part Name
Electronic connector
Part size
45*39.5*21mm
Raw Material
PA9T30GF
Color
RAL9005,Black
Mould Cavity No
1*4
Injection gate
Hot runner
Surface finished
VDI3400-33
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Application Scope
Euromicron's die casting mold is mostly used in the following scenes.Euromicron insists on providing customers with reasonable solutions according to their actual needs.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.
Product Details
With the pursuit of excellence, Euromicron is committed to showing you unique craftsmanship in details.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods. injection mold is in line with the stringent quality standards. The price is more favorable than other products in the industry and the cost performance is relatively high.
Company Advantages
1. Euromicron Mould precision molded plastics is manufactured utilizing the precision machining equipment.
2. The product is of high quality and has passed international certification.
3. This product provides good reliability and excellent performance at low cost.
4. The price of this product is competitive and is widely used by people in all fields.



◇◆ Product parameters


Part Name:Electronic connector
Part size:45*39.5*21mm
Raw Material:PA9T30GF
Color:RAL9005,Black
Mould Cavity No.:1*4
Injection gate:Hot runner 
Surface finished: VDI3400-33
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:250T
Cycle time:40S
Mold life:100000 shots
Customer:Bitron
Export:Italy


◇◆ PRODUCT FEATURES
A connector shell was supposed to be molded in glass-fiber-reinforced,flame-retardant nylon.

This connector include two different parts(upper and lower halves),were to be produced in a single mold.Prior to the start of production,the question arose as to whether a second gate might not be required to fill the part.To avoid weld lines and entrapped air.however,it might also be necessary to use only a single gate.This flexibility as to gating was supposed to be possible simple by switching a hot runner nozzle on or off.A further difficulty resulted from the small amount of space in which  the gates were to be located on the face of the molded part.All of these requirements were satisfied through the particular arrangement of the conductive,internally heated hot-runner system.

Mold design-We made this mold with four cavity.Runner system consists of a heated sprue bushing,a hot-runner manifold and four hot-runner nozzles.The hot-runner nozzles have not been installed parallel to the longitudinal axis of the mold,but rather at an angle.In spite of the unfavorable geometric relationships,it is possible to gate each part on its face in this manner.This arrangement is possible,because the solidified melt in the outer regions of the hot-runner manifold and nozzle channels precludes any possibility of leakage.Each of the hot-runner nozzle is individually controlled and can thus be switched on or off as required.It is thus possible to fill the part through either on or two gates.These measures alone,however,would not have been adequate to vary the gating possibilities.Attention also have to be given to the hot-runner manifold to ensure that no melt stagnated at continuously high temperatures in the runner channels when the various gating possibility were being employed.




Company Features
1. Euromicron Mould Engineering Limited is one of the earliest and largest communication processor manufacturer.
2. We have been very fortunate over the years to attract (and keep) some of the most talented, knowledgeable, organized, service-oriented professionals imaginable. These gentlemen are the very backbone of our company and have built the reputation we are proud to bear.
3. With the development of China's market economy, Euromicron Mould Engineering Limited vigorously implement the strategy of internationalization and diversification. Contact us! Our ultimate goal is to be one of the leading precision molded plastics suppliers. Contact us! Euromicron Mould Engineering Limited sticks to the going-out strategy and aims to be an international brand. Euromicron Mould Engineering Limited always puts high quality first. Contact us!
Favorable rate
100%
Buyer impression
This product has no buyer impression
  • All reviews(0)
  • Praise (0)
  • Average (0)
  • Bad review (0)
Product Message
社媒暂无评论
Chat Online 编辑模式下无法使用
Chat Online inputting...