Euromicron Mould Engineering Limited was found in 1995

Home  >  Customized Application  >  Electrommunication For sell  >  electronic communication equipment injection for electronic components Euromicron Mould
electronic communication equipment injection for electronic components Euromicron Mould

electronic communication equipment injection for electronic components Euromicron Mould

Product Name
Telecom set-top box
Product size
396*56*45mm
Material
ABS+PC
Cavity
1*2
Cycle time
45S
Customer
TOPFIELD
Export
Nethersland
Application Scope
cnc service developed and produced by Euromicron is widely applied to many industries and fields. It can fully meet the diversified needs of customers.According to different needs of customers, Euromicron is capable of providing reasonable, comprehensive and optimal solutions for customers.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.
Product Comparison
Euromicron carries out strict quality monitoring and cost control on each production link of injection mold, from raw material purchase, production and processing and finished product delivery to packaging and transportation. This effectively ensures the product has better quality and more favorable price than other products in the industry.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Compared with other products in the industry, injection mold has more obvious advantages which are reflected in the following aspects.
Company Advantages
1. Euromicron Mould electronic communication equipment fully complies with the relevant product safety Standard that governs it. It goes through a robust program of product testing, factory inspection, and on-going product surveillance to ensure safety.
2. custom plastic box has been improved on the basis of the old types and such properties as electronic communication equipment have been realized.
3. The product is in highly demand in the international market.


This cover is part of an telecom set-top box.
The appearance surface has dimension of 396X56X45mm.There are one round opening ¢35 and one rectangular opening 20X150mm.Also there are many boss and rid in high side.There is undercut on right wall of long side.



◇◆ Product Features


Mold design

We set sprue bushing on round opening,when fill with sub gate from both sides.Ejector sleeve need locate on boss to help release part.Pin or insert for high side rib to help air venting,also for easily manufacture or EMD process.A slider would be need for side undercut.Since all outside surface are visible,no slider split line is allowed.This mean a tunnel slider would be needed on core side.Mold base size would be 600X400mm with height 350mm.The design of the mold provide for simultaneous opening of the two parting lines with the aid of two racks and a pinion for each side.As it is essential that no gate marks show on the front of the molded parts,injection had to take place on the inside.

Cooling

This cover transfer heat quickly to mold surfaces.so that increased outlay on the cooling system is worthwhile in molds for such parts.Cooling of the core should be given special attention.Also some of the inserts are thin and very high.A beryllium/copper cap with six radial cooing channels is placed on the core insert.These cooling channel require drilling of the center of rube leading to the cap.This drilling weakens the center tube and there is the risk of rupture if the mounting nuts are tightened excessively.Compression spring are provided to permit an exactly defined tightening torque.Coolant is supplied to the cooling channels in the slides via tubes threaded into the slides.Slots in the guide strips allow these tubes to follow the motion of the slides.



Company Features
1. Euromicron Mould enjoys a certain reputation in the industry.
2. Euromicron Mould Engineering Limited has introduced advanced equipment and technology from foreign countries.
3. Euromicron Mould Engineering Limited strives to reduce and simplify management processes to achieve optimized efficiency. Please contact us! Euromicron Mould Engineering Limited will provide quality services to fully meet the needs of customers. Please contact us! Euromicron Mould Engineering Limited adheres to the faith of electronic communication equipment during the development of company. Please contact us!
Chat Online 编辑模式下无法使用
Chat Online inputting...